900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Motorola Electronic Components Datasheet

MC100EL12 Datasheet

Low Impedance Drive

No Preview Available !

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Low Impedance Driver
The MC10EL/100EL12 is a low impedance drive buffer. With two pairs
of OR/NOR outputs the device is ideally suited for high drive applications
such as memory addressing. The device is a function equivalent to the
E112 device with higher performance capabilities. With propagation
delays significantly faster than the E112 the EL12 is ideally suited for
those applications which require the ultimate in AC performance.
290ps Propagation Delay
Dual Outputs for 25Drive Applications
75kInternal Input Pulldown Resistors
>1000V ESD Protection
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
Qa 1
Qb 2
Qa 3
8 VCC
7 D0
6 D1
Qb 4
5 VEE
MC10EL12
MC100EL12
8
1
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751-05
PIN DESCRIPTION
PIN
D0, D1
Qa, Qb
FUNCTION
Data Inputs
Data Outputs
DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND)
–40°C
0°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Min Typ Max Unit
IEE Power Supply Current 10EL
100EL
14 17
14 17
14 17
14 17
14 17
14 17
14 17 mA
16 20
VEE
Power Supply Voltage 10EL –4.94 –5.2 –5.5 –4.94 –5.2 –5.5 –4.94 –5.2 –5.5 –4.94 –5.2 –5.5 V
100EL –4.20 –4.5 –5.5 –4.20 –4.5 –5.5 –4.20 –4.5 –5.5 –4.20 –4.5 –5.5
IIH Input HIGH Current
150 150 150 150 µA
AC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND)
–40°C
0°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Min Typ Max Unit
tPLH
tPHL
tr
tf
Propagation Delay to
Output
120 280 500 170 280 450 180 290 450 210 320 480
Output Rise/Fall Times Q
(20% – 80%)
150
350
550
150
350
550
150
350
550
150
350
550
ps
ps
12/93
© Motorola, Inc. 1996
3–1
REV 2


Motorola Electronic Components Datasheet

MC100EL12 Datasheet

Low Impedance Drive

No Preview Available !

MC10EL12 MC100EL12
–A–
8
–B–
1
5
4
G
OUTLINE DIMENSIONS
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751–05
ISSUE P
J
M_
–T–
8X D
SEATING
PLANE
0.25 (0.010) M T B S A S
NOTES:
1. DIMENSIONS A AND B ARE DATUMS AND T IS A
DATUM SURFACE.
2. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
3. DIMENSIONS ARE IN MILLIMETER.
4. DIMENSION A AND B DO NOT INCLUDE MOLD
PROTRUSION.
5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
6. DIMENSION D DOES NOT INCLUDE MOLD
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS
OF THE D DIMENSION AT MAXIMUM MATERIAL
CONDITION.
MILLIMETERS
DIM MIN MAX
A 4.80 5.00
B 3.80 4.00
C 1.35 1.75
D 0.35 0.49
F 0.40 1.25
G 1.27 BSC
J 0.18 0.25
K 0.10 0.25
M 0_ 7_
P 5.80 6.20
R 0.25 0.50
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454
MFAX: RMFAX0@email.sps.mot.com – TOUCHTONE 602–244–6609
INTERNET: http://Design–NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
MOTOROLA
*MC10EL12/D*MC10EL12/D
3–2 ECLinPS and ECLinPS Lite
DL140 — Rev 3


Part Number MC100EL12
Description Low Impedance Drive
Maker Motorola
Total Page 2 Pages
PDF Download

MC100EL12 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MC100EL11 1:2 Differential Fanout Buffer
Motorola
2 MC100EL11 1:2 Differential Fanout Buffer
ON Semiconductor
3 MC100EL12 Low Impedance Drive
Motorola
4 MC100EL12 Low Impedance Driver
ON Semiconductor
5 MC100EL13 Dual 1:3 Fanout Buffer
ON Semiconductor
6 MC100EL13 Dual 1:3 Fanout Buffer
Motorola
7 MC100EL14 1:5 Clock Distribution Chip
ON Semiconductor
8 MC100EL14 1:5 Clock Distribution Chip
Motorola
9 MC100EL15 1:4 Clock Distribution Chip
Motorola





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy