C23-L55 Datasheet | Moog

features - Long-life, externally replaceable brushes; various grade materials available for high / low voltage applications - Superior protection provided by totally enclosed, high strength, zinc-plated steel housing - Shaft configuration optional - Machined aluminum end-cap for precise locating; round or square. Precision-tapped mounting holes provided to your specifications - Silicon steel laminations - Diamond turned mutator for quiet operation and long brush life - Skewed rotors available for minimal cogging torque - Rotors are dynamically balanced to ISO G2.5 - Available with standard NEMA mountings - Polyester resin impregnated insulated windings - Double-shielded, permanently lubricated ball bearings, ABEC 5 standard; others optional benefits - Optional pre-aligned encoders provide accurate positioning - Tachometers are available - 7, 10, 14 V / KRPM - These motors offer continuous torques from 16.5 to 560 oz-in, peak torques from 125 to 3500 oz-in - Motor lengths - 3.33 to 9.0 inches - Diameter - 2.25 to 4.0 inches - Permanently lubricated bearings - Available with carbon steel or stainless steel shafts; single or double ended extensions - Custom shaft and end cap configurations are also available Moog ponents Group - .moog./ponents Permanent Magnet DC Motors C23, 34, 42 Series Available with integrated tachometers, resolvers and encoders for closed-loop control Moog ponents Group offers a plete line of 2.25 to 4 inches diameter permanent magnet motors. Integrated feedback devices (tachometers and encoders) are available for closed-loop control. We offer a variety of standard sizes. If mechanical modifications are needed, custom options are available for your specific application. Our engineering department is prepared to discuss your application to help tailor a permanent magnet motor to fit your needs. Note: This catalog contains basic marketing information and...