Datasheet4U Logo Datasheet4U.com

RA07H4047M-01 - 400-470MHz 7W 12.5V/ 2 Stage Amp. For PORTABLE/ MOBILE RADIO

Datasheet Summary

Description

The RA07H4047M is a 7-watt RF MOSFET Amplifier Module for 12.5-volt portable/ mobile radios that operate in the 400- to 470-MHz range.

The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors.

Features

  • Enhancement-Mode MOSFET Transistors (IDD≅ 0 @ VDD=12.5V, VGG=0V).
  • Pout>7W @ VDD=12.5V, VGG=3.5V, Pin=20mW.
  • ηT>40% @ Pout=7W (V GG control), VDD=12.5V, Pin=20mW.
  • Broadband Frequency Range: 400-470MHz.
  • Low-Power Control Current IGG=1mA (typ) at VGG=3.5V.
  • Module Size: 30 x 10 x 5.4 mm.
  • Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power 1 4 5.

📥 Download Datasheet

Datasheet preview – RA07H4047M-01

Datasheet Details

Part number RA07H4047M-01
Manufacturer Mitsubishi Electric Semiconductor
File Size 66.72 KB
Description 400-470MHz 7W 12.5V/ 2 Stage Amp. For PORTABLE/ MOBILE RADIO
Datasheet download datasheet RA07H4047M-01 Datasheet
Additional preview pages of the RA07H4047M-01 datasheet.
Other Datasheets by Mitsubishi Electric Semiconductor

Full PDF Text Transcription

Click to expand full text
MITSUBISHI RF MOSFET MODULE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RA07H4047M BLOCK DIAGRAM 2 3 400-470MHz 7W 12.5V, 2 Stage Amp. For PORTABLE/ MOBILE RADIO DESCRIPTION The RA07H4047M is a 7-watt RF MOSFET Amplifier Module for 12.5-volt portable/ mobile radios that operate in the 400- to 470-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (V GG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 2.5V (minimum), output power and drain current increases substantially. The nominal output power becomes available at 3V (typical) and 3.
Published: |