PS21963-4C
PS21963-4C is Intelligent Power Module manufactured by Mitsubishi Electric.
MITSUBISHI SEMICONDUCTOR <Dual-In-Line Package Intelligent Power Module>
PS21963-4/-4A/-4C/-4W
TRANSFER-MOLD TYPE INSULATED TYPE
PS21963-4
INTEGRATED POWER FUNCTIONS
600V/10A low-loss 5th generation IGBT inverter bridge for three phase DC-to-AC power conversion
INTEGRATED DRIVE, PROTECTION AND SYSTEM CONTROL FUNCTIONS
- -
- -
- For upper-leg IGBTS :Drive circuit, High voltage high-speed level shifting, Control supply under-voltage (UV) protection. For lower-leg IGBTS : Drive circuit, Control supply under-voltage protection (UV), Short circuit protection (SC). Fault signaling : Corresponding to an SC fault (Lower-leg IGBT) or a UV fault (Lower-side supply). Input interface : 3V, 5V line (High Active). UL Approved : Yellow Card No. E80276
APPLICATION AC100V~200V three-phase inverter drive for small power motor control.
Fig. 1 PACKAGE OUTLINES (PS21963-4)
38 ±0.5 20×1.778(=35.56) 35 ±0.3 A
.Data Sheet.net/
Dimensions in mm
B TERMINAL CODE 3.5
0.28 1.778 ±0.2
16-0.5
1.5 ±0.05
14.4 ±0.5
.6 R1 2-
QR Code
3 MIN
Type name Lot No.
0.8 HEAT SINK SIDE
18 0.28 2.54 ±0.2 14×2.54 (=35.56) 0.5 0.5 0.5
8-0.6
4-C1.2
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25.
NC VUFB VVFB VWFB UP VP WP VP1...
