MR-J3 motors equivalent, servo amplifiers and motors.
MR-J3-700B
RA1 RA2 NO.
explicitly described in this manual and the manuals listed below. Please take care to observe all the installation and o.
The 3-digit, seven-segment LED shows the servo status and alarm number.
Used to set the axis number of the servo amplifier
A
B CDE
SW2-1 is used to perform the test operation mode by using MR Configurator (Setup software). SW2-2 is spare (Be sure .
Image gallery
TAGS
Download (Size : 934.12KB)