SP5510 - 1.3GHz Bidirectional I2C BUS Controlled Synthesiser
Mitel Networks
General Description
The SP5510 is programmed from an I2 C BUS.
Data and Clock are fed in on the SDA and SCL lines respectively as defined by the I2C Bus format.
The synthesiser can either accept new data (write mode) or send data (read mode).
Key Features
s Complete 1.
3GHz Single Chip System
s s s s s s s s s s
Programmable via the I2C BUS Low Power Consumption (215mW Typ. ) Low Radiation Phase Lock Detector Varactor Drive Amp Disable 8 Controllable Outputs, 4 Bi-directional(SP5510) 5 Controllable Outputs, 4 Bi-directional (SP5510S) 5-Level ADC Variable I2C BUS Address for Picture in Picture TV ESD Protection.
Normal ESD handling precautions should be observed.
Full PDF Text Transcription for SP5510 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
SP5510. For precise diagrams, and layout, please refer to the original PDF.
SP5510 1.3GHz Bidirectional I2C BUS Controlled Synthesiser Supersedes version in April 1994 Consumer IC Handbook, HB3120 - 2.0 DS2184 - 4.0 Janaury 1997 The SP5510 is a s...
View more extracted text
IC Handbook, HB3120 - 2.0 DS2184 - 4.0 Janaury 1997 The SP5510 is a single-chip frequency synthesiser designed for TV tuning systems. Control data is entered in the standard I2C BUS format. The device has four addressable currentlimited output ports (P0-P3) and four bi-directional opencollector ports (P4-P7), one of which (P6) is also a 3-bit 5-level ADC input. The information on these ports can be read via the I2C BUS. The SP5510S is a variant in a 16-lead miniature plastic package, without P0-P2 but functionally identical in other respects. Both variants have one fixed I2C BUS address and three programmable addresses, a
SP5510 Datasheet
