Datasheet4U Logo Datasheet4U.com

XL1005 - 5.0-20.0 GHz GaAs MMIC Low Noise Amplifier

Description

Mimix Broadband’s single stage 5.0-20.0 GHz GaAs Absolute Maximum Ratings MMIC low noise amplifier has a small signal gain of 13.0 dB with a noise figure of 2.2 dB across the band.

Features

  • Wideband Low Noise Amplifier 13.0 dB Small Signal Gain 2.2 dB Noise Figure 100% On-Wafer RF, DC and Noise Figure Testing 100% Visual Inspection to MIL-STD-883 Method 2010 General.

📥 Download Datasheet

Datasheet Details

Part number XL1005
Manufacturer Mimix Broadband
File Size 338.19 KB
Description 5.0-20.0 GHz GaAs MMIC Low Noise Amplifier
Datasheet download datasheet XL1005 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XL1000-BD Low Noise Amplifier MA-COM
XL1002-BD Low Noise Amplifier MA-COM
XL1010-QT Low Noise Amplifier MA-COM
XL1050 High speed CAN transceiver XINLUDA
XL1192 HBS-Compatible Driver and Receiver Monolithic IC XLSEMI

Other Datasheets by Mimix Broadband

Part Number Description
XL1000 20.0-40.0 GHz GaAs MMIC Low Noise Amplifier
XL1001 17.0-35.0 GHz GaAs MMIC Low Noise Amplifier
XL1002 20.0-36.0 GHz GaAs MMIC Low Noise Amplifier
XL1003 24.0-40.0 GHz GaAs MMIC Low Noise Amplifier
XL1004 35.0-45.0 GHz GaAs MMIC Low Noise Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 5.0-20.0 GHz GaAs MMIC Low Noise Amplifier May 2006 - Rev 10-May-06 L1005 Chip Device Layout Features Wideband Low Noise Amplifier 13.0 dB Small Signal Gain 2.2 dB Noise Figure 100% On-Wafer RF, DC and Noise Figure Testing 100% Visual Inspection to MIL-STD-883 Method 2010 General Description Mimix Broadband’s single stage 5.0-20.0 GHz GaAs Absolute Maximum Ratings MMIC low noise amplifier has a small signal gain of 13.0 dB with a noise figure of 2.2 dB across the band. This Supply Voltage (Vd1) +5.5 VDC MMIC uses Mimix Broadband’s 0.15 µm GaAs PHEMT Supply Current (Id) 120 mA device model technology, and is based upon electron Gate Bias Voltage (Vg1) +0.3 VDC beam lithography to ensure high repeatability and Gate Bias Voltage (Vg2) TBD uniformity.
Published: |