CGB7017-BD Datasheet | Mimix Broadband

Features Low Operating Voltage: 5V 33.8 d Bm Output IP3 @ 850 MHz 3.3 d B Noise Figure @ 850 MHz 23.1 d B Gain @ 850 MHz, 19.5 d B @ 6 GHz 18.2 d Bm P1d B @ 850 MHz Low Performance Variation Over Temperature Low Cost: Die Form or SOT-89 Package 100% DC On-Wafer Testing ESD Protection on All Die: >1000V HBM Low Thermal Resistance: <100ºC/Watt Functional Block Diagram (SOT -89) Ground 4 1 Input Ground Output Bias Absolute Maximum Ratings Max Device Voltage Max Device Current Max Device Dissipated Power RF Input Power Storage Temperature Junction Temperature Operating Temperature Thermal Resistance EDS (HBM) +6.0 V 130 m A 0.65 W +17 d Bm -55ºC to 150ºC 150ºC -40ºC to +85ºC 85º C/W 1000 V Description The CGB7017-SC (-BD) is a Darlington Configured, high dynamic range, utility gain block amplifier. Designed for applications operating within the DC to 8.0 GHz frequency range, Mimix’s broadband, cascadable, gain block amplifiers are ideal solutions for transmit, receive and IF applications. These MMIC amplifiers are available in bare die form or an industry standard SOT-89 package. Mimix's In Ga P HBT technology and an industry low thermal resistance offers a thermally robust and reliable gain block solution. The In Ga P HBT die have extra pads to enable thorough DC testing. This unique test capability and the inclusion of ESD protection on all die, significantly enhances the quality, reliability and ruggedness of these products. With a single bypass capacitor, optional RF choke and two DC blocking capacitors, this gain block amplifier offers significant ease of use in a broad range of applications. Operation of this device above any of these parameters may cause permanent damage. Applications PA Driver Amp, IF Amp, LO Buffer Amp Cellular, PCS, GSM, UMTS Wireless Data and SAT Transmit and Receive Functions CATV Electrical Characteristics Parameter Temperature (ºC) Min. Unless otherwise specified, the following specifications are guaranteed at room temperature in a...