DC-6.0 GHz InGaP HBT, MMIC or Packaged
Matched Gain Block Amplifier
August 2006 - Rev 31-Aug-06
CGB7007-SC (-BD)
Features
34.0 dBm Output IP3 @ 850 MHz
4.5 dB Noise Figure @ 850 MHz
19.0 dB Gain @ 850 MHz
18.8 dBm P1dB @ 850 MHz
Low Performance Variation Over Temperature
Low Cost: Die Form or SOT-89 Package
100% DC On-Wafer Testing
ESD Protection on All Die: >1000V HBM
Low Thermal Resistance: <90ºC/Watt
Functional Block Diagram (SOT-89)
Ground
4
1 23
Input Ground Output
Bias
Absolute Maximum Ratings
Description
The CGB7007-SC (-BD) is a Darlington Configured, high dynamic
range, utility gain block amplifier. Designed for applications
operating within the DC to 6.0 GHz frequency range, Mimix’s
broadband, cascadable, gain block amplifiers are ideal solutions
for transmit, receive and IF applications.
These MMIC amplifiers are available in bare die form or an
industry standard SOT-89 package. Mimix's InGaP HBT
technology and an industry low thermal resistance offers a
thermally robust and reliable gain block solution.
Max Device Voltage
+6.0 V
Max Device Current
120 mA
Max Device Dissipated Power
0.58 W
RF Input Power
+17 dBm
Storage Temperature
-55ºC to 150ºC
Junction Temperature
150ºC
Operating Temperature
-40ºC to +85ºC
Thermal Resistance
90º C/W
EDS (HBM)
1000 V
Operation of this device above any of these parameters may cause
permanent damage.
The InGaP HBT die have extra pads to enable thorough DC
testing. This unique test capability and the inclusion of ESD
protection on all die, significantly enhances the quality, reliability
and ruggedness of these products.
Applications
PA Driver Amp, IF Amp, LO Buffer Amp
Cellular, PCS, GSM, UMTS
With a single bypass capacitor, optional RF choke and two DC
Wireless Data and SATCOM
blocking capacitors, this gain block amplifier offers significant
ease of use in a broad range of applications.
Transmit and Receive Functions
CATV
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Parameter
Small Signal Gain
Output P1dB
Output IP3
Noise Figure
Operating Current
Input Return Loss
Output Return Loss
Pout @ -45 dBc, ACP
IS-95, 9 Forward Channels
Temperature (ºC)
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
850 MHz
Min. Typ. Max.
17.8 19.0 20.2
17.6 19.0 20.4
17.8 18.8
17.5 18.8
32.5 34.0
31.5 34.0
4.5 5.3
4.5 5.6
63 67 71
60 67 74
16.0 21.0
15.0 21.0
20.0 25.0
19.0 25.0
12.5
12.5
1950 MHz
Min. Typ. Max.
15.8 17.0 18.2
15.6 17.0 18.4
17.5 18.5
17.2 18.5
31.3 32.8
30.8 32.8
4.7 5.5
4.7 5.9
63 67 71
60 67 74
12.0 17.0
11.0 17.0
12.0 17.0
11.0 17.0
13.0
13.0
2400 MHz
Min. Typ. Max.
15.0 16.2 17.4
14.8 16.2 17.6
17.3 18.3
17.0 18.3
30.5 32.0
30.0 32.0
4.8 5.6
4.8 6.0
63 67 71
60 67 74
9.5 14.0
9.0 14.0
15.0 20.0
14.0 20.0
3500 MHz
Min. Typ. Max.
14.5
14.5
16.5
16.5
30.0
30.0
5.0
5.0
67
67
14.0
14.0
15.0
15.0
Units
dB
dB
dBm
dBm
dBm
dBm
dB
dB
mA
mA
dB
dB
dB
dB
dBm
dBm
Notes: 1. Test Conditions in Mimix eval board, Vs = 8 V, Id = 67 mA Typ., Rbias = 47 , Zs = Zl = 50 , OIP3 tone spacing = 1 MHz, Pout per tone = 3 dBm.
2. Values reflect performance in recommended application circuit.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 8
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
