596290899 Datasheet | Military Part

DESCRIPTION DATE (YR-MO-DA) 94-03-25 APPROVED M. A. Frye LTR A Updated boilerplate. Added device types 09 - 13. Moved endurance and data retention testing requirements from Section 4 of drawing to Section 3 of drawing. Editorial changes throughout. Updated boilerplate. Added vendor CAGE 01295 as a source of supply. Editorial changes throughout. - glg Changed standoff width on "U" package. Added vendor CAGE 0EU86 as a source of supply. - glg 98-04-16 99-11-16 Raymond Monnin Raymond Monnin REV SHEET REV SHEET REV STATUS OF SHEETS C 15 C 16 C 17 C 18 REV SHEET PREPARED BY Gary L. Gross C 19 C 20 C 21 C 1 C 22 C 2 C 23 C 3 C 24 C 4 C 5 C 6 C 7 C 8 C 9 C 10 C 11 C 12 C 13 C 14 PMIC N/A DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216 STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY Ray Monnin APPROVED BY Michael A. Frye MICROCIRCUIT, MEMORY, DIGITAL, CMOS 128K X 8 BIT FLASH EEPROM, MONOLITHIC SILICON DRAWING APPROVAL DATE 92-08-31 SIZE REVISION LEVEL C CAGE CODE AMSC N/A SHEET 1 OF 24 5962-90899 DSCC FORM 2233 APR 97 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. 5962-E050-00 .. 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. 1.2 PIN. The PIN shall be as shown in the following example: 5962 - 90899 Federal stock class designator...