ART2815T Datasheet | Micross

HYBRID-HIGH RELIABILITY RADIATION HARDENED DC-DC CONVERTER PD-94529I ART28XXT SERIES 28V Input, Triple Output Description The ART Series of three output DC-DC converters are designed specifically for use in the hostile radiation environments characteristic of space and weapon systems. The extremely high level of radiation tolerance inherent in the ART design is the culmination of extensive research, thorough analysis and testing and of careful ponent selection. Many of the proven circuit design Features characterizing the IR Hirel standard product line were adapted for incorporation into the ART topology. Capable of uniformly high performance over long term exposures in radiation intense environments, this series sets the standard for distributed power systems demanding high performance and reliability. The ART converters are hermetically sealed in a rugged, low profile package utilizing copper core pins to minimize resistive DC losses. Long-term hermetically is assured through use of parallel seam welded lid attachment along with IR Hi Rel rugged ceramic pin-to-package seal. Axial orientation of the leads facilitates preferred bulkhead mounting to the principal heat-dissipating surface. Manufactured in a facility fully qualified to MIL-PRF38534, these converters are fabricated utilizing DLA Land and Maritime qualified processes. For available screening options, refer to device screening table in the data sheet. Variations in electrical, mechanical and screening specifications can be acmodated. Contact IR Hi Rel San Jose for special requirements. Features - Total Dose > 100 k Rads(Si), 2:1margin - SEE Hardened to LET up to 83 Me V.cm2/mg - Output Power Range 3 to 30 Watts - 19 to 50 Volt Input Range - Input Under voltage Lockout - High Electrical Efficiency > 83% - Full Performance from -55°C to +125°C - Continuous Short Circuit and Overload Protection - 12.8 W/in3 Output Power Density - True Hermetic Package - External Inhibit Port - Externally...