SG120-XXK Datasheet, Microsemi Corporation

of thermal shutdown, current limiting, and safe-area control have been designed into these units and since these regulators require only a single output capacitor or a ca.

FIGURE 9 - FIXED OUTPUT REGULATOR FIGURE 10 - CIRCUIT FOR INCREASING OUTPUT VOLTAGE NOTE: 1. C1 is required only if r.

The SG120 series of negative regulators offer self-contained, fixed-voltage capability with up to 1.5A of load current. With a variety of output voltages and four package options this regulator series is an optimum complement to the SG7800A/ 7800/120.