Datasheet4U Logo Datasheet4U.com

SG109 - 5 -VOLT FIXED VOLTAGE REGULATORS

Description

The SG109/SG309 is a completely self-contained 5V regulator.

Designed to provide local regualtion at currents up to 1A for digital logic cards, this device is available in the hermetic TO-3, TO-66, TO39 and hermetic and plastic TO-220.

Features

  • which make it essentially blowout proof. These consist of both current limiting to control the peak currents and thermal shutdown to protect against excessive power dissipation. With the only added component being a possible need for an input bypass capacitor, this regulator becomes extremely easy to apply. Utilizing an improved Bandgap reference design, problems have been eliminated that are normally associated with the zener diode references, such as drift in output voltage and large changes i.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SG1000 Split Third Port Telecommunications Optical Node Installation and Operation Manual Motorola
SG1010AZG-T-1 TFT module ETC
SG106 CATV Amplifier SEMIWILL
SG107 Operational Amplifiers Silicon General
SG10L20USM Fast Recovery Diode SHINDENGEN

Other Datasheets by Microsemi (Microchip)

Part Number Description
SG117 1.5 AMP THREE TERMINAL ADJUSTABLE VOLTAGE REGULATOR
SG117A 1.5 AMP THREE TERMINAL ADJUSTABLE VOLTAGE REGULATOR
SG120 NEGATIVE FIXED VOLTAGE REGULATOR
SG120-XXIG NEGATIVE FIXED VOLTAGE REGULATOR
SG120-XXK NEGATIVE FIXED VOLTAGE REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SG109/SG309 5 -VOLT FIXED VOLTAGE REGULATORS DESCRIPTION The SG109/SG309 is a completely self-contained 5V regulator. Designed to provide local regualtion at currents up to 1A for digital logic cards, this device is available in the hermetic TO-3, TO-66, TO39 and hermetic and plastic TO-220. A major feature of the SG109's design is its built-in protective features which make it essentially blowout proof. These consist of both current limiting to control the peak currents and thermal shutdown to protect against excessive power dissipation. With the only added component being a possible need for an input bypass capacitor, this regulator becomes extremely easy to apply.