ZL30136 Datasheet | Microsemi

Features - Provides synchronous clocks for network interface cards that support synchronous Ethernet (Sync E) in addition to tele interfaces (T1/E1, DS3/E3, etc.) - Supports the requirements of ITU-T G.8262 for Synchronous Ethernet equipment slave clocks (EEC option 1 and 2) - Synchronizes to tele reference clocks (2 k Hz, N- 8 k Hz up to 77.76 MHz) or to Ethernet reference clocks (25 MHz, 50 MHz, 62.5 MHz, 125 MHz, and 155.52 MHz) - Generates Ethernet clocks (12.5 MHz, 25 MHz, 50 MHz, 62.5 MHz, or 125 MHz) - Programmable tele synthesizer generates clock frequencies of any multiple of 8 k Hz up to 100 MHz - Selectable loop bandwidth of 14 Hz, 28 Hz, 890 Hz, or 0.1 Hz - Generates several styles of output frame pulses with selectable pulse width, polarity and frequency - Provides 3 sync inputs for output frame pulse alignment - Flexible input reference monitoring automatically disqualifies references based on frequency and phase irregularities ZL30136 Gb E and Tele Rate Network Interface Synchronizer Data Sheet October 2015 Ordering Information ZL30136GGG 64 Pin CABGA ZL30136GGG2 64 Pin CABGA- - Pb Free Tin/Silver/Copper -40C to +85C Trays Trays - Supports automatic hitless reference switching and short term holdover during loss of reference inputs - DPLL can be configured to provide synchronous or asynchronous clock outputs - Configurable through a serial interface (SPI or I2C) - Supports IEEE 1149.1 JTAG Boundary Scan Applications - Gb E network interface cards that support synchronous Ethernet (Sync E) - GPON ONT/ONU - T1/E1 line cards - DS3/E3 line cards Figure 1 - Functional Block Diagram Copyright 2015, Microsemi Corporation All Rights Reserved. Data Sheet Table of Contents 1.0 Pin Diagram - - - - - - - - - - - - - - . . . ....