SMBJ5.0 Datasheet | Microsemi

SCOTTSDALE DIVISION SMBJ5.0 thru SMBJ170A, CA, e3 and SMBG5.0 thru SMBG170A, CA, e3 SURFACE MOUNT 600 Watt Transient Voltage Suppressor .Microsemi . DESCRIPTION APPEARANCE This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive ponents from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting density or in a Gull-wing design (SMBG) in the DO-215AA for visible solder connections. It is also available in both unidirectional and bidirectional configurations with a C or CA suffix part number as well as Ro HS pliant with an e3 suffix. Their response time is virtually instantaneous. As a result, they can be used for protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4, or for inductive switching environments and induced RF protection. They can also protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein. Microsemi also offers numerous other TVS products to meet higher and lower power demands and special applications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://.microsemi. NOTE: All SMB series are equivalent to prior SMS package identifications. Features APPLICATIONS / BENEFITS - Available in both unidirectional and bidirectional construction (add C or CA suffix for bidirectional) - Selections for 5.0 to 170 volts standoff voltages (VWM) - Optional 100% screening for avionics grade is available by adding MA prefix to part number for 100% temperature cycle -55o C to +125o C (10X) as well as surge (3X) and 24 hours HTRB with post test VZ & IR (in operating direction for unidirectional or both directions for bidirectional) - Options for screening in accordance with MIL-PRF-19500 for JANTX are available by adding MX prefix to the part number. - Axial-lead equivalent packages for thru-hole mounting available as P6KE6.8 to...