P6KE100A Datasheet | Microsemi

SCOTTSDALE DIVISION P6KE6.8 thru 200CA, e3 600 Watt TRANSIENT VOLTAGE SUPPRESSOR .Microsemi . DESCRIPTION APPEARANCE This P6KE series is an economical 600 W Transient Voltage Suppressor (TVS) for protecting voltage-sensitive ponents from destruction or degradation. It is available in both unidirectional and bi-directional configurations as well as Ro HS pliant (annealed matte-Tin finish) with an e3 suffix added to the part number. The response time of their clamping action is virtually instantaneous. As a result, they may also be used effectively for protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4 or for inductive switching environments and induced RF. They can also be used for protecting other sensitive ponents from secondary lightning effects per IEC61000-4-5 and class levels defined herein. Microsemi also offers numerous other TVS products to meet higher and lower power demands and special applications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://.microsemi. T-18 Features APPLICATIONS / BENEFITS - Available in both unidirectional and bidirectional (add C or CA suffix to part number for bidirectional) - Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% temperature cycle -55o C to +125o C (10X) as well as surge (3X) and 24 hours HTRB with post test VZ & IR (in the operating direction for unidirectional or both directions for bidirectional) - Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, and JANTXV are available by adding MQ, MX, or MV prefixes respectively to part numbers. - Surface mount equivalents available as SMBJP6KE6.8 to SMBJP6KE200CA or SMBJ5.0 to SMBJ170CA (consult factory for other surface mount options) - Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B - Ro HS pliant devices available by adding “e3” suffix - Selections for 6.8 to 200 volts breakdown (VBR) -...