Datasheet4U Logo Datasheet4U.com

1N6384 - 1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR

Download the 1N6384 datasheet PDF. This datasheet also covers the 1N6373 variant, as both devices belong to the same 1500 watt low clamping factor transient voltage suppressor family and are provided as variant models within a single manufacturer datasheet.

Description

This Transient Voltage Suppressor (TVS) series for 1N6373 thru 1N6389 are JEDEC registered selections for both unidirectional and bidirectional devices.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (1N6373-Microsemi.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
1N6384 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR STANDOFF VOLTAGE- 5.0 to 45.0V 1500 Watt Peak Power ETC
1N6384 Transient Voltage Suppressors Vishay
1N6384 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR MDE
1N6384 1500W Transient Voltage Suppressor TAITRON
1N6384 Zener Transient Voltage Suppressors Motorola

Other Datasheets by Microsemi (Microchip)

Part Number Description
1N6380 1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR
1N6381 1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR
1N6382 1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR
1N6383 1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR
1N6385 1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SCOTTSDALE DIVISION 1N6373 thru 1N6389, e3 or MPTE-5 thru MPTE-45C, e3 1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR WWW.Microsemi .COM DESCRIPTION APPEARANCE This Transient Voltage Suppressor (TVS) series for 1N6373 thru 1N6389 are JEDEC registered selections for both unidirectional and bidirectional devices. The 1N6373 thru 1N6381 are unidirectional and the 1N6382 thru 1N6389 are bi-directional where they all provide a very low specified clamping factor for minimal clamping voltages (VC) above their respective breakdown voltages (VBR) as specified herein. They are most often used in protecting sensitive components from inductive switching transients or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5 .
Published: |