Datasheet4U Logo Datasheet4U.com

1N6368 - 1500 Watt Low Clamping Factor Transient Voltage Suppressor

Download the 1N6368 datasheet PDF. This datasheet also covers the 1N6358 variant, as both devices belong to the same 1500 watt low clamping factor transient voltage suppressor family and are provided as variant models within a single manufacturer datasheet.

Description

This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices.

Features

  • Screening in reference to MIL-PRF-19500 available.
  • Unidirectional and bidirectional TVS series in axial package for thru-hole mounting.
  • Suppresses transients up to 1500 watts @ 10/1000 µs (see figure 1).
  • tclamping (0 volts to V(BR) min): Unidirectional.
  • Less than 100 picoseconds. Bidirectional.
  • Less than 5 nanoseconds.
  • Working voltage (VWM) range 10 V to 45 V.
  • Low clamping factor (ratio of actual VC/VBR): 1.33 @ full rated powe.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (1N6358-Microsemi.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
1N6368 Transient Voltage Suppressor Digitron Semiconductors
1N6360 Transient Voltage Suppressor Digitron Semiconductors
1N6361 Transient Voltage Suppressor Digitron Semiconductors
1N6362 Transient Voltage Suppressor Digitron Semiconductors
1N6363 Transient Voltage Suppressor Digitron Semiconductors

Other Datasheets by Microsemi (Microchip)

Part Number Description
1N6360 1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6361 1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6362 1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6363 1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6364 1500 Watt Low Clamping Factor Transient Voltage Suppressor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
1N6358 – 1N6372 or MPT-10 – MPT-45C Available 1500 Watt Low Clamping Factor Transient Voltage Suppressor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices. The 1N6358 through 1N6364 are unidirectional and the 1N6366 through 1N6372 are bidirectional where they all provide a very low specified clamping factor for minimal clamping voltages (VC) above their respective breakdown voltages (VBR) as specified herein. They are most often used in protecting sensitive components from inductive switching transients or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5.
Published: |