Datasheet4U Logo Datasheet4U.com

TC3683 - Inverting Charge Pump Voltage Doublers

This page provides the datasheet information for the TC3683, a member of the TC3682 Inverting Charge Pump Voltage Doublers family.

Description

The TC3682/TC3683/TC3684 are CMOS charge pump converters that provide an inverted doubled output from a single positive supply.

An on-board oscillator provides the clock and only three external capacitors are required for full circuit implementation.

Features

  • TC3682/TC3683/TC3684 General.

📥 Download Datasheet

Datasheet preview – TC3683

Datasheet Details

Part number TC3683
Manufacturer Microchip Technology
File Size 446.20 KB
Description Inverting Charge Pump Voltage Doublers
Datasheet download datasheet TC3683 Datasheet
Additional preview pages of the TC3683 datasheet.

📁 Similar Datasheet

  • TC368 - High Noise Immunity Logic (Sertech)
  • TC367 - High Noise Immunity Logic (Sertech)
  • TC36V - 500 mW DO-35 Hermetically Sealed Glass Zener Voltage Regulators (Tak Cheong)
  • TC301D - touch sensor (Nutech)
  • TC303 - POWER NAND GATES (ETC)
  • TC308BMJ - Quartz SMD (Auris-GmbH)
  • TC3097-8 - LITE END MULTIPORT REPEATER INTERFACE CONTROLLER (ETC)
  • TC3097F-5 - LITE END MULTIPORT REPEATER INTERFACE CONTROLLER (ETC)
  • TC3097F-8 - LITE END MULTIPORT REPEATER INTERFACE CONTROLLER - OCF (ETC)
  • TC30V - 500 mW DO-35 Hermetically Sealed Glass Zener Voltage Regulators (Tak Cheong)
Other Datasheets by Microchip Technology
  • TC3682 - Inverting Charge Pump Voltage Doublers
  • TC3684 - Inverting Charge Pump Voltage Doublers

Full PDF Text Transcription

Click to expand full text
M Features • • • • • • • TC3682/TC3683/TC3684 General Description The TC3682/TC3683/TC3684 are CMOS charge pump converters that provide an inverted doubled output from a single positive supply. An on-board oscillator provides the clock and only three external capacitors are required for full circuit implementation. Switching frequencies are 12kHz for the TC3682, 35kHz for the TC3683, and 125kHz for the TC3684. When the SHDN pin is held at a logic low, the device goes into a very low power mode of operation consuming less than 1µA (typ) of supply current. Low output source impedance (typically 120Ω), provides output current up to 10mA. The TC3682/TC3683/ TC3684 feature a 1.8V to 5.
Published: |