PIC24F08KM101 Datasheet | Microchip Technology

Features - Up to Two 8-Bit Digital-to-Analog Converters (DAC): - Soft Reset disable function allows DAC to retain its output value through non-VDD Resets - Support for Idle mode - Support for left and right-justified input data - Two Operational Amplifiers (Op Amps): - Differential inputs - Selectable power/speed levels: - Low power/low speed - High power/high speed - Up to 22-Channel, 10/12-Bit Analog-to-Digital Converter: - 100k samples/second at 12-bit conversion rate (single Sample-and-Hold) - Auto-scan with Threshold Detect - Can operate during Sleep - Dedicated band gap reference and temperature sensor input - Up to Three Rail-to-Rail Analog parators: - Programmable reference voltage for parators - Band gap reference input - Flexible input multiplexing - Low-power or high-speed selection options - Charge Time Measurement Unit (CTMU): - Capacitive measurement, up to 22 channels - Time measurement down to 200 ps resolution - Up to 16 external Trigger pairs - Internal Temperature Sensor with Dedicated A/D Converter Input Multiple/Single Capture pare Peripheral (MCCP/SCCP) Features - 16 or 32-Bit Time Base - 16 or 32-Bit Capture - 4-Deep Capture Buffer - 16 or 32-Bit pare: - Single Edge pare modes - Dual Edge pare/PWM modes - Center-Aligned pare mode - Variable Frequency Pulse mode - Fully Asynchronous Operation, Available in Sleep modes - Single Output Steerable mode (MCCP only) - Brush DC Forward and Reverse modes (MCCP only) - Half-Bridge with Dead-Time Delay (MCCP only) - Push-Pull PWM mode (MCCP only) - Auto-Shutdown with Programmable Source and Shutdown...