Datasheet4U Logo Datasheet4U.com

MCP4262 - 7/8-Bit Single/Dual SPI Digital POT

Download the MCP4262 datasheet PDF. This datasheet also covers the MCP4131 variant, as both devices belong to the same 7/8-bit single/dual spi digital pot family and are provided as variant models within a single manufacturer datasheet.

General Description

The MCP41XX and MCP42XX devices offer a wide range of product offerings using an SPI interface.

WiperLock Technology allows application-specific calibration settings to be secured in the EEPROM.

Key Features

  • Single or Dual Resistor Network options.
  • Potentiometer or Rheostat configuration options.
  • Resistor Network Resolution - 7-bit: 128 Resistors (129 Steps) - 8-bit: 256 Resistors (257 Steps).
  • RAB Resistances options of: - 5 kΩ - 10 kΩ - 50 kΩ - 100 kΩ.
  • Zero-Scale to Full-Scale Wiper operation.
  • Low Wiper Resistance: 75Ω (typical).
  • Low Tempco: - Absolute (Rheostat): 50 ppm typical (0°C to 70°C) - Ratiometric (Potentiometer): 15 ppm typic.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MCP4131-MicrochipTechnology.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number MCP4262
Manufacturer Microchip
File Size 2.21 MB
Description 7/8-Bit Single/Dual SPI Digital POT
Datasheet download datasheet MCP4262 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MCP4104 N-Channel 40-V (D-S) MOSFET Freescale
MCP41HVX1 7/8-Bit Single / +36V Digital POT Microchip
MCP4531 7/8-Bit Single/Dual I2C Digital POT Microchip
MCP4532 7/8-Bit Single/Dual I2C Digital POT Microchip
MCP4541 7/8-Bit Single/Dual I2C Digital POT Microchip

Other Datasheets by Microchip

Part Number Description
MCP4261 7/8-Bit Single/Dual SPI Digital POT
MCP42010 Single/Dual Digital Potentiometer with SPI Interface
MCP42010T Single/Dual Digital Potentiometer with SPI Interface
MCP42050 Single/Dual Digital Potentiometer with SPI Interface
MCP42050T Single/Dual Digital Potentiometer with SPI Interface

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MCP414X/416X/424X/426X 7/8-Bit Single/Dual SPI Digital POT with Non-Volatile Memory Features • Single or Dual Resistor Network options • Potentiometer or Rheostat configuration options • Resistor Network Resolution - 7-bit: 128 Resistors (129 Steps) - 8-bit: 256 Resistors (257 Steps) • RAB Resistances options of: - 5 kΩ - 10 kΩ - 50 kΩ - 100 kΩ • Zero-Scale to Full-Scale Wiper operation • Low Wiper Resistance: 75Ω (typical) • Low Tempco: - Absolute (Rheostat): 50 ppm typical (0°C to 70°C) - Ratiometric (Potentiometer): 15 ppm typical • Non-volatile Memory - Automatic Recall of Saved Wiper Setting - WiperLock™ Technology • SPI serial interface (10 MHz, modes 0,0 & 1,1) - High-Speed Read/Writes to wiper registers - Read/Write to Data EEPROM registers - Serially enabled EEPROM write protect