Datasheet4U Logo Datasheet4U.com

SST11CP22 Datasheet 5.1-5.9 GHz High-Power 11ac WLAN Power Amplifier

Manufacturer: Microchip Technology

📥 Download Datasheet

General Description

SST11CP22 is a 50Ω, RF-matched power amplifier module (PAM) with a FCC-compliant harmonic filter that is based on the highly-reliable InGaP/GaAs HBT technology.

Operating over the 5.1–5.9 GHz frequency band, SST11CP22 meets 802.11a spectrum mask requirements up to 24 dBm and 802.11n HT40 spectrum mask at 23.5 dBm.

With 802.11a modulation, this PA typically provides up to 20.5 dBm with 3% EVM, and provides 19 dBM with less tan 1.8% dynamic EVM using 802.11ac modulation, MCS9, 80 MHz bandwidth.

Overview

SST11CP22 5.1-5.9 GHz High-Power 11ac WLAN Power Amplifier.

Key Features

  • Small package size - 20-contact UQFN (4mm x 4mm x 0.6 mm max).
  • 50Ω input and output match including DC blocks.
  • Integrated harmonic filter.
  • Operating voltage - VCC = 5.0V.
  • Operating frequency: 5.1 to 5.9 GHz.
  • High linear output power, typical performance: - 802.11a OFDM Spectrum mask compliant up to 24 dBm - 802.11n HT40 OFDM Spectrum mask compliant up to 23.5 dBm - 3% EVM up to 20.5 dBm for 802.11a, 54 Mbps signal - 2.5% EVM up to 20 dBm for.

More Datasheets from Microchip Technology

Part Number Description
SST11CP15 4.9-5.9 GHz High-Linearity Power Amplifier
SST11CP15E 4.9-5.9 GHz High-Linearity Power Amplifier
SST11CP16 5.1-5.9 GHz High-Linearity Power Amplifier
SST11LF04 High-Efficiency Front-end Module
SST12CP11C High-Efficiency Power Amplifier
SST12CP21 High-Efficiency Power Amplifier
SST12CP33 2.4 GHz WLAN Power Amplifier
SST12LF02 High-Efficiency FEM
SST12LF09 WLAN Front-End Module
SST12LN01 2.4-2.5 GHz WLAN Low-Noise Amplifier