PIC32MM0032GPL036 Datasheet | Microchip Technology

Features - Low Pin Count Packages, Ranging from 20 to 36 Pins, including UQFN as Small as 4x4 mm - Up to 64K Flash Memory: - 20,000 erase/write cycle endurance - 20 years minimum data retention - Self-programmable under software control - Up to 8K Data Memory - Pin-patible with Most PIC24 MCU/ds PIC® DSC Devices - Multiple Interrupt Vectors with Individually Programmable Priority - Fail-Safe Clock Monitor mode - Configurable Watchdog Timer with On-Chip, Low-Power RC Oscillator - Programmable Code Protection - Selectable Oscillator Options including: - High-precision, 8 MHz internal Fast RC (FRC) oscillator - High-speed crystal/resonator oscillator or external clock - 2x/3x/4x/6x/12x/24x PLL, which can be clocked from the FRC or primary oscillator Peripheral Features - Atomic Set, Clear and Invert Operation on Select Peripheral Registers - High-Current Sink/Source 11 m A/16 m A on All Ports - Independent, Low-Power 32 k Hz Timer Oscillator - Two 4-Wire SPI modules (up to 25 MHz non-PPS,  20 MHz PPS): - 16-byte FIFO - I2S mode - Two UARTs: - RS-232, RS-485 and LIN/J2602 support - Ir DA® with on-chip hardware encoder and decoder - External Edge and Level Change Interrupt on All Ports - CRC module - Hardware Real-Time Clock and Calendar (RTCC) - Up to 20 Peripheral Pin Select (PPS) Remappable Pins - Seven Total 16-Bit Timers: - Timer1: Dedicated 16-bit timer/counter - Two additional 16-bit timers in each MCCP and SCCP module - Capture/pare/PWM/Timer modules: - Two 16-bit timers or one 32-bit timer in each module - PWM resolution down to 21...