PIC32CM1216MC00032 Datasheet | Microchip Technology

5-Volt Motor Control MCU PIC32CM MC00 Family 5-Volt, 128-KB Flash, 16-KB SRAM with Advanced Analog Operating Conditions - 2.7V - 5.5V, -40°C to +85°C, DC to 48 MHz - 2.7V - 5.5V, -40°C to +125°C, DC to 48 MHz Qualification - AEC-Q100 Grade 1 (-40°C to 125°C) Core: Arm® Cortex®-M0+ CPU running at up to 48 MHz - Single-cycle hardware multiplier - Memory Protection Unit (MPU) Memories - Up to 128 KB in-system self-programmable Flash - Up to 4 KB independent self-programmable Flash for Data Flash - Up to 16 KB SRAM main memory System - Power-on Reset (POR) and Brown-out Detection (BOD) - Internal and external clock options with 48 MHz to 96 MHz Fractional Digital Phase Locked Loop (FDPLL96M) - External Interrupt Controller (EIC) - One non-maskable interrupt Low Power - Idle and Standby sleep modes - Sleep Walking peripherals Input/Output (I/O) - Up to 38 programmable I/O pins - Up to 16 external interrupts - Up to two parallel Input/Output Controllers (PIO) Debugger Development Support - In-circuit and in-application programming - 2-wire Serial Wire Debug Port Interface - Four hardware breakpoints, two data watchpoints - Micro Trace Buffer (MTB) for instruction trace in SRAM Motor Control - Two 24-bit Timer/Counters and one 16-bit Timer/Counter for Control (TCC) with extended functions: - Up to four pare channels with optional plementary output - Generation of synchronized pulse width modulation (PWM) pattern across port pins - Deterministic fault protection, fast decay and configurable dead-time between plementary output - Dithering that increase resolution with up to 5 bit and reduce quantization error - Up to 8 waveform output channels Advanced Analog - Two 12-bit, 1 Msps Analog-to-Digital Converter (ADC) - Differential and single-ended input - Automatic offset and gain error...