900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  Microchip Technology Semiconductor Electronic Components Datasheet  

PIC16LF18456 Datasheet

Low Pin Count Microcontrollers

No Preview Available !

PIC16(L)F18455/56
28-Pin Full-Featured, Low Pin Count Microcontrollers with
XLP
Description
PIC16(L)F184XX microcontrollers feature Intelligent Analog, Core Independent Peripherals (CIPs) and
communication peripherals combined with eXtreme Low-Power (XLP) for a wide range of general purpose and low-
power applications. Features such as a 12-bit Analog-to-Digital Converter with Computation (ADC2), Memory Access
Partitioning (MAP), the Device Information Area (DIA), Power-Saving operating modes, and Peripheral Pin Select
(PPS), offer flexible solutions for a wide variety of custom applications.
Core Features
• C Compiler Optimized RISC Architecture
• Operating Speed:
– DC – 32 MHz clock input
– 125 ns minimum instruction cycle
• Interrupt Capability
• 16-Level Deep Hardware Stack
• Up to Four 8-Bit Timers
• Up to Four 16-Bit Timers
• Low-Current Power-on Reset (POR)
• Configurable Power-up Timer (PWRT)
• Brown-out Reset (BOR)
• Low-Power BOR (LPBOR) Option
• Windowed Watchdog Timer (WWDT):
– Variable prescaler selection
– Variable window size selection
– All sources configurable in hardware or software
• Programmable Code Protection
Memory
• Up to 28 KB Program Flash Memory
• Up to 2 KB Data SRAM Memory
• 256B Data EEPROM
• Direct, Indirect and Relative Addressing Modes
• Memory Access Partition (MAP):
– Write-protect
– Customizable partition
• Device Information Area (DIA)
• Device Characteristics Information (DCI)
© 2019 Microchip Technology Inc.
Datasheet
DS40002038C-page 1


  Microchip Technology Semiconductor Electronic Components Datasheet  

PIC16LF18456 Datasheet

Low Pin Count Microcontrollers

No Preview Available !

PIC16(L)F18455/56
Operating Characteristics
• Operating Voltage Range:
– 1.8V to 3.6V (PIC16LF184XX)
– 2.3V to 5.5V (PIC16F184XX)
• Temperature Range:
– Industrial: -40°C to 85°C
– Extended: -40°C to 125°C
eXtreme Low-Power (XLP) Features
• Doze: CPU and Peripherals Running at Different Cycle Rates (Typically CPU is Lower)
• Idle: CPU Halted While Peripherals Operate
• Sleep: Lowest Power Consumption
• Peripheral Module Disable (PMD):
– Ability to selectively disable hardware module to minimize active power consumption of unused peripherals
• Extreme Low-Power Mode (XLP)
– Sleep: 500 nA typical @ 1.8V
– Sleep and Watchdog Timer: 900 nA typical @ 1.8V
Power-Saving Operation Modes
• Sleep Mode: 50 nA @ 1.8V, Typical
• Watchdog Timer: 500 nA @ 1.8V, Typical
• Secondary Oscillator: 500 nA @ 32 kHz
• Operating Current:
– 8 uA @ 32 kHz, 1.8V, typical
– 32 uA/MHz @ 1.8V, typical
Digital Peripherals
• Configurable Logic Cell (CLC):
– Four CLCs
– Integrated combinational and sequential logic
• Complementary Waveform Generator (CWG):
– Three CWGs
– Rising and falling edge dead-band control
– Full-bridge, half-bridge, 1-channel drive
– Multiple signal sources
• Capture/Compare/PWM (CCP) Modules:
– Five CCPs
– 16-bit resolution for Capture/Compare modes
– 10-bit resolution for PWM mode
• Pulse-Width Modulators (PWM):
– Two 10-bit PWMs
• Numerically Controlled Oscillator (NCO):
– Precision linear frequency generator (@50% duty cycle) with 0.0001% step size of source input clock
– Input Clock: 0 Hz < fNCO < 32 MHz
– Resolution: fNCO/220
© 2019 Microchip Technology Inc.
Datasheet
DS40002038C-page 2


Part Number PIC16LF18456
Description Low Pin Count Microcontrollers
Maker Microchip
PDF Download

PIC16LF18456 Datasheet PDF






Similar Datasheet

1 PIC16LF18455 Low Pin Count Microcontrollers
Microchip
2 PIC16LF18456 Low Pin Count Microcontrollers
Microchip





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy