PIC16LF1825 Datasheet | Microchip Technology

Features - Full 5.5V Operation - PIC12F1822/16F1823 - 1.8V-3.6V Operation - PIC12LF1822/16LF1823 - Self-Reprogrammable under Software Control - Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) - Programmable Brown-out Reset (BOR) - Extended Watchdog Timer (WDT) - In-Circuit Serial Programming™ (ICSP™) via Two Pins - In-Circuit Debug (ICD) via Two Pins - Enhanced Low-Voltage Programming (LVP) - Operating Voltage Range: - 1.8V-5.5V (PIC12F1822/16F1823) - 1.8V-3.6V (PIC12LF1822/16LF1823) - Programmable Code Protection - Self-Programmable under Software Control Extreme Low-Power Management PIC12LF1822/16LF1823 with XLP - Sleep mode: 20 n A @ 1.8V, typical - Watchdog Timer: 300 n A @ 1.8V, typical - Timer1 Oscillator: 650 n A @ 32 k Hz, typical - Operating Current: 30 µA/MHz @ 1.8V, typical Analog Features - Analog-to-Digital Converter (ADC) module: - 10-bit resolution, up to 8 channels - Conversion available during Sleep - Analog parator module: - Up to two rail-to-rail analog parators - Power mode control - Software controllable hysteresis - Voltage Reference module: - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels - 5-bit rail-to-rail resistive DAC with positive and negative reference selection Peripheral Highlights - Up to 11 I/O Pins and 1 Input-Only Pin: - High current sink/source 25 m A/25 m A - Programmable weak pull-ups - Programmable interrupt-on-change pins - Timer0: 8-Bit Timer/Counter with 8-Bit...