Datasheet4U Logo Datasheet4U.com

PD70211 - PD Controller

Description

2.

Electrical Specifications 7 2.1.

Absolute Maximum Ratings7 2.2.

Features

  • an internal bleeder for discharging the input capacitor of the DC/DC converter rapidly to ensure fast re-detection and port power-up, in case of a sudden removal and re-insertion of the Ethernet cable into the RJ-45. The advanced PWM current-mode section supports synchronous Flyback and Active Clamp Forward topologies, as well as Buck, Boost, and so on. Features The PD70211 device has the following key features.
  • Supports IEEE 802.3af/at, HDBaseT, and other 2-pair/4-pair configurations.

📥 Download Datasheet

Datasheet preview – PD70211

Datasheet Details

Part number PD70211
Manufacturer Microchip
File Size 879.97 KB
Description PD Controller
Datasheet download datasheet PD70211 Datasheet
Additional preview pages of the PD70211 datasheet.

📁 Similar Datasheet

  • PD70211 - PD Controller (Microsemi)
  • PD70210 - Front-End PD Interface Controller (Microsemi)
  • PD70210A - Front-End PD Interface Controller (Microsemi)
  • PD70210AL - Front-End PD Interface Controller (Microsemi)
  • PD70200 - IEEE 802.3af/at PD Front End IC (Microsemi)
  • PD70201 - Power Over Ethernet 802.3af/at PD Controller (Microsemi)
  • PD70224 - Dual MOSFET-based Bridge Rectifier (Microsemi)
  • PD70-01B-TR10 - Silicon Planar PIN Photodiode (Everlight Electronics)
  • PD70-01B-TR7 - Silicon Planar PIN Photodiode (Everlight Electronics)
  • PD70-01C-TR10 - Silicon Planar PIN Photodiode (Everlight Electronics)
Other Datasheets by Microchip
  • PD70210 - Front-End PD Interface Controller
  • PD70210A - Front-End PD Interface Controller
  • PD70210AL - Front-End PD Interface Controller
  • PD70200 - IEEE 802.3af/at PD Front-End
  • PD70201 - 802.3af/at PD Controller
  • PD70224 - Dual MOSFET-Based Bridge Rectifier
  • PD70100 - IEEE 802.3af/at PD Front-End
  • PD70101 - 802.3af/at PD Controller

Full PDF Text Transcription

Click to expand full text
PD70211 PD Controller with Switching Regulator for AF/AT/UPOE/ HDBaseT/4-pair PoE Applications Product Overview Microchip's PD70211 is an advanced PD interface IC with integrated switching Pulse-Width Modulation (PWM) regulator control for powered devices in PoE applications. It supports IEEE® 802.3af, IEEE 802at, HDBaseT, and general 2/4-pair configurations. The PD70211 front-end includes an advanced classification block that supports 2, 3, 4, and 6 event classification. Using the SUPP_Sx pins, it also identifies the four pairs of cable that actually receive power and generate appropriate flags.
Published: |