PAC1931 Datasheet | Microchip Technology

Features - High-Side Current Monitor with One, Two, Three or Four Channels - 100 m V full-scale range for current sense voltage,16-bit resolution - Selectable bidirectional current sense capability, -100 m V to +100 m V range, 16-bit two’s plement (signed) data format - External sense resistor sets full scale current range - Very low input current simplifies routing - Wide Bus Voltage Range for Voltage Monitor - 0V to 32V input mon-mode voltage - 16-bit resolution for voltage measurements; 14 bits are used for power calculations - Real Time Auto-Calibration of Offset and Gain Errors for Voltage and Current, No User Adjustment Required - 1% Power Measurement Accuracy over a Wide Dynamic Range - On-Chip Accumulation of 28-bit Power Results for Energy Measurement - 48-bit power accumulator register for recording accumulated power data - 24-bit Accumulator Count - User programmable sampling rates of 8, 64, 256 and 1024 samples per second - 17 minutes of power data accumulation minimum at 1024 S/s - Over 36 hours of power data accumulation minimum at 8 S/s - 2.7V to 5.5V Supply Operation - Separate VDD I/O pin for digital I/O - 1.62-5.5V capable SMBus and digital I/O - SMBus 3.0 and I2C Fast Mode Plus (1 Mb/S) - SMBus Address - 16 Options, set with Resistor - No Input Filters Required - ALERT Features that can be Enabled: - ALERT on accumulator overflow - ALERT on Conversion plete - 4 × 4 × 0.5 mm UQFN Package - 2.225 × 2.17 mm WLCSP Package Applications - Embedded puting - Networking - FPGA Systems - Automotive - Low Voltage/High Power - AI, GPU - Industrial - Linux® Applications - Notebook and Tablet puting - Cloud, Linux and Server...