Datasheet4U Logo Datasheet4U.com

MTD6501C - 3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver

General Description

The MTD6501C/D/G devices are 3-phase, full-wave drivers for brushless sensorless DC motors.

They feature 180° sinusoidal drive, high torque output, and silent drive.

Key Features

  • Position Sensorless BLDC Drivers (No Hall Sensor Required).
  • 180° Sinusoidal Drive, for High Efficiency and Low Acoustic Noise.
  • Support 2V to 14V Power Supplies.
  • Speed Control Through PAM and/or PWM.
  • Built-in Frequency Generator (FG Output Signal).
  • Built-in Lock-up Protection and Automatic Recovery Circuit (External Capacitor not Necessary).
  • Built-in Over Current Limitation and Short Circuit Protection.
  • Built-in Thermal Shut.

📥 Download Datasheet

Datasheet Details

Part number MTD6501C
Manufacturer Microchip
File Size 742.27 KB
Description 3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver
Datasheet download datasheet MTD6501C Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MTD655 5 Port 10M/100M Hub MYSON TECHNOLOGY
MTD658 8 Port 10M/100M Hub MYSON TECHNOLOGY
MTD658E 5/8 Port 10/100 Hub Build_in Bridge And Memory ETC
MTD6N10 TMOS POWER FET 6 AMPERES RDS(on) = 0.25 OHM 80 and 100 VOLTS Motorola
MTD6N10E TMOS POWER FET 6.0 AMPERES 100 VOLTS RDS(on) = 0.400 OHM Motorola

Other Datasheets by Microchip

Part Number Description
MTD6501D 3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver
MTD6501G 3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver
MTD6502B 5V 3-Phase BLDC Sinusoidal Sensorless Fan Motor Driver
MTD6505 3-Phase Sinusoidal Sensorless Brushless Motor Driver
MTD6508 3-Phase Sinusoidal Sensorless Brushless DC Fan Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MTD6501C/D/G 3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver Features • Position Sensorless BLDC Drivers (No Hall Sensor Required) • 180° Sinusoidal Drive, for High Efficiency and Low Acoustic Noise • Support 2V to 14V Power Supplies • Speed Control Through PAM and/or PWM • Built-in Frequency Generator (FG Output Signal) • Built-in Lock-up Protection and Automatic Recovery Circuit (External Capacitor not Necessary) • Built-in Over Current Limitation and Short Circuit Protection • Built-in Thermal Shutdown Protection • Thermally Enhanced SOP-8 Package for MTD6501C and MTD6501G (Maximum Output Current – 800 mA); • MSOP-10L Package for MTD6501D (Maximum Output Current – 500 mA) • 20 kHz PWM Output Frequency for MTD6501C/D and 23 kHz for MTD6501G • Boost Mode (Optional Back Electro