Datasheet4U Logo Datasheet4U.com

MPP4403 - MMSM PIN Diodes

Download the MPP4403 datasheet PDF. This datasheet also covers the MPP4400 variant, as both devices belong to the same mmsm pin diodes family and are provided as variant models within a single manufacturer datasheet.

Features

  • Up to 10W incident RF power handling.
  • Low parasitics.
  • LP = 0.02 nH Typical.
  • CP = 0.04 pF Typical.
  • Broadband performance through X.
  • Band.
  • Available on tape and reel or on film frame for pick and place.
  • Small, SOD 323 footprint.
  • RoHS compliant1 Package Style.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MPP4400-Microchip.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MPP4201 (MPP4201 - MPP4700) Pin Diode Microsemi Corporation
MPP4202 (MPP4201 - MPP4700) Pin Diode Microsemi Corporation
MPP4203 (MPP4201 - MPP4700) Pin Diode Microsemi Corporation
MPP4204 (MPP4201 - MPP4700) Pin Diode Microsemi Corporation
MPP4700 (MPP4201 - MPP4700) Pin Diode Microsemi Corporation

Other Datasheets by Microchip

Part Number Description
MPP4400 MMSM PIN Diodes

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Control Devices - MMSM PIN Diodes MPP4400 - MPP4403 Product Overview The MPP4400 series of PIN diodes can be used in RF circuits as an on/off element, as a switch, or as a current controlled resistor in attenuators extending over the frequency range from UHF through X band. Switch applications include high speed switches (ECM systems), TR switches channel or antenna selection switches (Telcom and WLAN applications), duplexers (radar) and digital phase shifters (phased array). These diodes are also used as passive and active limiters for low to moderate RF power levels. Attenuator type applications include amplitude modulators, AGC attenuators and power levelers. This series of devices meets RoHS requirements. Key Features • Up to 10W incident RF power handling • Low parasitics • LP = 0.
Published: |