KSZ8462FHLI Datasheet | Microchip Technology

Features Management Capabilities - The KSZ8462 Includes All the Functions of a 10/ 100BASE-T/TX/FX Switch System that bines a Switch Engine, Frame Buffer Management, Address Look-Up Table, Queue Management, MIB Counters, Media Access Controllers (MAC) and PHY Transceivers - Non-Blocking Store-and-Forward Switch Fabric Ensures Fast Packet Delivery by Utilizing 1024 Entry Forwarding Table - Port Mirroring/Monitoring/Sniffing: Ingress and/or Egress Traffic to any Port - MIB Counters for Fully pliant Statistics Gathering: 34 Counters per Port - Loopback Modes for Remote Failure Diagnostics - Rapid Spanning Tree Protocol Support (RSTP) for Topology Management and Ring/Linear Recovery Robust PHY Ports - Two Integrated IEEE 802.3/802.3u-pliant Ethernet Transceivers Supporting 10BASE-T and 100BASE-TX - Copper and 100BASE-FX Fiber Mode Support in the KSZ8462FHL - Copper Mode Support in the KSZ8462HL - On-Chip Termination Resistors and Internal Biasing for Differential Pairs to Reduce Power - HP Auto MDI/MDI-X Crossover Support Eliminates the Need to Differentiate Between Straight or Crossover Cables in Applications MAC Ports - Three Internal Media Access Control (MAC) Units - 2Kbyte Jumbo Packet Support - Tail Tagging Mode (One byte Added before FCS) Support at Port 3 to Inform The Processor Which Ingress Port Receives the Packet and its Priority - Programmable MAC Addresses for Port 1 and Port 2 and Source Address Filtering for Implementing Ring Topologies - MAC Filtering Function to Filter or Forward Unknown Unicast Packets - Port 1 and Port 2 MACs Programmable as Either E2E or P2P Transparent Clock (TC) Ports for 1588 Support Advanced Switch Capabilities - Non-Blocking Store-and-Forward Switch Fabric Ensures Fast Packet Delivery by Utilizing 1024 Entry Forwarding Table - IEEE 802.1Q VLAN for Up to 16 Groups with Full Range of VLAN IDs - IEEE 802.1p/Q Tag Insertion or Removal on a per Port Basis (Egress) and Support Double-Tagging - VLAN ID Tag/Untag Options on per Port...