DSA1121 Datasheet | Microchip Technology

Features - Automotive AEC-Q100 Qualified - Two Rise/Fall Time Options for EMI Reduction - Low RMS Phase Jitter: <1 ps (typ.) - High Stability: ±20 ppm, ±25 ppm, ±50 ppm - Wide Temperature Range: - Automotive Grade 1: - 40°C to +125°C - Automotive Grade 2: - 40°C to +105°C - Automotive Grade 3: - 40°C to +85°C - High Supply Noise Rejection: - 50 d Bc - Wide Freq. Range: 2.3 MHz to 170 MHz - Small Industry Standard Footprints - 2.5 mm x 2.0 mm VDFN - 3.2 mm x 2.5 mm VDFN and Wettable Flank - 5.0 mm x 3.2 mm CDFN - Excellent Shock and Vibration Immunity - Qualified to MIL-STD-883 - High Reliability - 20x Better MTF than Quartz Oscillators - Low Current Consumption - Supply Range of 2.25V to 3.63V - Standby and Output Enable Function - Lead-Free and Ro HS pliant Applications - Automotive Infotainment - Automotive ADAS - Automotive Camera Module - Automotive LIDAR and RADAR Benefits - Replace High Temperature Crystals and Quartz Oscillators General Description The DSA1101 and DSA1121 series of high performance oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages and temperatures. By eliminating the need for quartz or SAW technology, MEMS oscillators significantly enhance reliability and accelerate product development, while meeting stringent clock performance criteria for a variety of munications, storage, and networking applications. DSA1101 has a standby feature that allows it to pletely power-down when EN pin is pulled low. For DSA1121, only the outputs are disabled when EN is low. Both oscillators are available in industry standard packages, including the small 2.5 mm x 2.0 mm, and are “drop-in” replacements for standard 4-pin and 6-pin CMOS quartz crystal oscillators. The DSA1105/25 is functionally equivalent to the DSA1101/21, but it has lower drive strength for EMI reduction. Functional Block Diagram  2018-2021 Microchip Technology...