A100HI
A100HI is 1.5W Single & Dual Output DC/DC Converters manufactured by MicroPower Direct.
Features
:
- 1.5W Output Power
- 8,000 VDC Isolation
- 2 µA Leakage Current Max
- pact DIP Case
- Single & Dual Outputs
- Meets EN55022 Class A
- 1.0 MH MTBF
- Industry Standard Pin-Out
Input Parameter
Input Voltage Range Input Filter Reverse Polarity Input Current Short Circuit Input Power
Conditions
Min.
Typ.
5.0 12.0 15.0
Max.
5.5 13.2 16.5 0.5 1,000
Units
5 VDC Input 4.5 12 VDC Input 10.8 15 VDC Input 13.5 (Pi) Filter
A m W
Output Parameter
Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation, (Note 1) Ripple & Noise (20 MHz) (Note 2) Ripple & Noise (20 MHz) Ripple & Noise (20 MHz) Output Power Protection Temperature Coefficient Output Short Circuit
.Data Sheet.net/
Conditions
Min.
Typ.
Max.
±4.0 ±2.0 ±1.5 40 50 15 ±0.02
Units
% % % m V P
- P m V P
- P m V rms % %/ºC
±2.0 Dual Output , Balanced Loads ±0.5 For Vin Change of 1% ±1.2 See Model Selection Guide 30 Over Line, Load & Temp. 120 ±0.01 Continuous
General Parameter
Isolation Voltage, Rated Isolation Test Voltage Leakage Current Isolation Resistance Isolation Capacitance Switching Frequency
Conditions
60 Seconds Flash Tested For 1 Second 240 VAC, 60 Hz 500 VDC 100 k Hz,...
