Datasheet4U Logo Datasheet4U.com

MAS1175 - IC FOR 10.00 - 20.00 MHz VCTCXO

Description

The MAS1175 is an integrated circuit well suited to build VCTCXO for mobile communication.

Only two external components are needed.

Temperature calibration is achieved with three calibration points only.

Features

  • Very small size Minimum current draw Wide operating temperature range Phase noise.

📥 Download Datasheet

Datasheet Details

Part number MAS1175
Manufacturer Micro Analog systems
File Size 148.89 KB
Description IC FOR 10.00 - 20.00 MHz VCTCXO
Datasheet download datasheet MAS1175 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAS110S Fast Turn-off Asymmetric Thyristor/Diode Module Dynex
MAS1008 MAS1008 Tesla
MAS1206 Equipment Designed to Conform EMI Regulations Such As VCCI /CISPR /FCC /VDE /etc DENSEI-LAMBDA
MAS1206-33 Equipment Designed to Conform EMI Regulations Such As VCCI /CISPR /FCC /VDE /etc DENSEI-LAMBDA
MAS1210-33 Equipment Designed to Conform EMI Regulations Such As VCCI /CISPR /FCC /VDE /etc DENSEI-LAMBDA

Other Datasheets by Micro Analog systems

Part Number Description
MAS1178 IC FOR 10.00 - 20.00 MHz VCXO
MAS1016 am Receiver
MAS1016B am Receiver
MAS1017 am Receiver
MAS6116 Stereo Digital Volume Control

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DA1175.008 13 July, 2006 MAS1175 IC FOR 10.00 – 20.00 MHz VCTCXO Low Power Wide Supply Voltage Range True Sine Wave Output Very High Level of Integration • Electrically Trimmable • Very Low Phase Noise • Low Cost • • • • DESCRIPTION The MAS1175 is an integrated circuit well suited to build VCTCXO for mobile communication. Only two external components are needed. Temperature calibration is achieved with three calibration points only. The trimming is done through a serial bus and the calibration information is stored in an internal PROM. To build a VCTCXO only two additional components, a varactor and a crystal are needed. The compensation method is fully analog. IC compensation work is continuous without generating any steps or other interferences.
Published: |