Datasheet4U Logo Datasheet4U.com

MIC811 - Microprocessor Reset Circuits

Description

The MIC811 and MIC812 are inexpensive microprocessor supervisory circuits that monitor power supplies in microprocessor based systems.

The function of this device is to assert a reset if either the power supply drops below a designated reset threshold level or /MR is forced low.

Features

  • Precision voltage monitor for 3V, 3.3V or 5V power supplies.
  • /RESET remains valid with VCC as low as 1V.
  • 5μA typical supply current.
  • 140ms minimum reset pulse width available.
  • Manual reset input.
  • Available in 4-pin SOT-143 package.

📥 Download Datasheet

Datasheet Details

Part number MIC811
Manufacturer Micrel Semiconductor
File Size 193.91 KB
Description Microprocessor Reset Circuits
Datasheet download datasheet MIC811 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC826 Voltage Supervisor Microchip
MIC841 Comparator Microchip
MIC842 Comparator Microchip
MIC862 Dual Ultra-Low Power Op Amp Microchip
MIC863 Dual Ultra-Low Power Op Amp Microchip

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC8114 Microprocessor Reset Circuit
MIC8115 Microprocessor Reset Circuit
MIC810 Microprocessor Reset Circuits
MIC812 Microprocessor Reset Circuits
MIC803 3-Pin Microprocessor Supervisor Circuit

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC811/812 Microprocessor Reset Circuits General Description The MIC811 and MIC812 are inexpensive microprocessor supervisory circuits that monitor power supplies in microprocessor based systems. The function of this device is to assert a reset if either the power supply drops below a designated reset threshold level or /MR is forced low. Several different reset threshold levels are available to accommodate 3V, 3.3V or 5V powered systems. The MIC811 has an active low /RESET output, while the MIC812 offers an active high RESET output. The reset output is guaranteed to remain asserted for a minimum of 140ms after VCC has risen above the designed reset threshold level. Having a push-pull output stage, the MIC811/812 does not require a pull-up resistor at the output.
Published: |