Datasheet4U Logo Datasheet4U.com

MIC2804 - High-Voltage High-Current Darlington Array

Description

Pin Number 1 8 9 10 11 18 Pin Name IN1 IN8 GND COM OUT8

OUT1 Pin Function Input 1 through Input 8: Base drive to Darlington transistor via current limiting resistor.

Ground Clamp Diode Common Output 8 through Output 1: Open collector output of Darlington transistor.

Features

  • inputs compatible with 5V TTL and CMOS logic while the MIC2804 features inputs compatible with 6V to 15V CMOS or PMOS logic outputs. The MIC2803/4 is available in 18-pin plastic DIP and wide SOIC packages in the.
  • 40°C to +85°C temperature range. Features.
  • Output voltage to 50V Output current to 500mA Open-collector outputs Integral clamp diodes TTL, CMOS, or PMOS compatible inputs.

📥 Download Datasheet

Datasheet preview – MIC2804

Datasheet Details

Part number MIC2804
Manufacturer Micrel Semiconductor
File Size 29.38 KB
Description High-Voltage High-Current Darlington Array
Datasheet download datasheet MIC2804 Datasheet
Additional preview pages of the MIC2804 datasheet.

📁 Similar Datasheet

  • MIC280 - Precision IttyBitty Thermal Supervisor (Microchip)
  • MIC281 - Low-Cost Thermal Sensor (Microchip)
  • MIC28303 - 3A Power Module (Microchip)
  • MIC28304 - 3A Power Module Hyper Speed Controller (Microchip)
  • MIC284 - Two-Zone Thermal Supervisor (Microchip)
  • MIC28511 - 3A Synchronous Buck Regulator (Microchip)
  • MIC28512 - 2A Synchronous Buck Regulator (Microchip)
  • MIC28513 - 4A Synchronous Buck Regulator (Microchip)
  • MIC28514 - DC/DC Buck Regulator (Microchip)
  • MIC28515 - Synchronous DC/DC Buck Regulator (Microchip)
Other Datasheets by Micrel Semiconductor
  • MIC280 - Thermal Supervisor
  • MIC2800 - Digital Power Management
  • MIC2803 - High-Voltage High-Current Darlington Array
  • MIC2807 - RF PA Power Management
  • MIC2808 - Dual Low Noise 200mA/30mA LDO Regulators
  • MIC281 - Thermal Sensor
  • MIC2826 - Quad Output PMIC
  • MIC2827 - Triple Output PMIC

Full PDF Text Transcription

Click to expand full text
MIC2803/2804 Micrel MIC2803/2804 High-Voltage High-Current Darlington Array Not Recommended for New Designs General The MIC2803 and MIC2804 are high-voltage, high-current Darlington arrays ideal for switching high-power loads from logic-level TTL, CMOS, or PMOS control signals. The MIC2803/4 Darlington transistor array can be used to manage multiple loads of up to 50V and 500mA, limited by package power dissipation. The MIC2803 features inputs compatible with 5V TTL and CMOS logic while the MIC2804 features inputs compatible with 6V to 15V CMOS or PMOS logic outputs. The MIC2803/4 is available in 18-pin plastic DIP and wide SOIC packages in the –40°C to +85°C temperature range.
Published: |