Datasheet4U Logo Datasheet4U.com

MIC2778 - Voltage Monitor with Adjustable Hysteresis Preliminary Information

Description

The MIC2778 is a voltage monitor uniquely designed to detect two separate voltage thresholds

combined with a delay generator and logic.

It is designed for monitoring the battery supply of portable digital systems, particularly PDAs, pagers, and cellular telephones.

Features

  • Optimized for PDAs, cellular telephones, pagers, and other battery-powered devices.
  • Independently adjustable high- and low-voltage thresholds.
  • Internal logic prevents battery-voltage-fluctuation chatter.
  • High ± 2% voltage threshold accuracy; 1% available.
  • Built in 140ms (minimum) delay deglitches output.
  • Extremely low 1µA typical supply current.
  • For.

📥 Download Datasheet

Datasheet Details

Part number MIC2778
Manufacturer Micrel Semiconductor
File Size 65.84 KB
Description Voltage Monitor with Adjustable Hysteresis Preliminary Information
Datasheet download datasheet MIC2778 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC2772 Dual Voltage Supervisor MICREL
MIC2774 Dual Micropower Low Voltage Supervisor Microchip
MIC2775 Micropower Low Voltage Supervisor Microchip
MIC27600 36V / 7A Hyper Speed Control Synchronous DC-DC Buck Regulator MICREL
MIC2785 Dual Supply Voltage Monitor MICREL

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC2774 Dual Micro-Power Low Voltage Supervisor
MIC2775 Micro-Power Voltage Supervisor
MIC2776 Micro-Power Low Voltage Supervisor
MIC2777 Dual Micro-Power Low Voltage Supervisor
MIC2779 Voltage Monitor with Adjustable Hysteresis Preliminary Information

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC2778 Micrel MIC2778 Voltage Monitor with Adjustable Hysteresis Preliminary Information General Description The MIC2778 is a voltage monitor—uniquely designed to detect two separate voltage thresholds—combined with a delay generator and logic. It is designed for monitoring the battery supply of portable digital systems, particularly PDAs, pagers, and cellular telephones. High- and low-voltage thresholds can be adjusted independently, allowing for wide hysteresis. Voltage detection thresholds are accurate to 2%. If the battery voltage falls below the low-voltage threshold, the output (RST) is asserted and latched, preventing system operation until the battery is replaced or recharged. Internal logic prevents the output from chattering due to battery recovery or load removal.
Published: |