900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Micrel Semiconductor

MIC2587 Datasheet Preview

MIC2587 Datasheet

Positive High-Voltage Hot Swap Controller

No Preview Available !

MIC2587/MIC2587R
Single-Channel, Positive High-Voltage
Hot Swap Controller
Revision 2.0
General Description
The MIC2587 and MIC2587R are single-channel positive
voltage hot swap controllers designed to provide safe
insertion and removal of boards for systems that require
live (always-powered) backplanes. These devices use few
external components and act as controllers for external N-
channel power MOSFET devices to provide inrush current
control and output voltage slew rate control. Overcurrent
fault protection is provided via programmable analog fold-
back current-limit circuitry equipped with a programmable
overcurrent filter. These protection circuits combine to limit
the power dissipation of the external MOSFET to ensure
that the MOSFET is in its SOA during fault conditions. The
MIC2587 provides a circuit breaker function that latches
the output MOSFET off if the load current exceeds the
current limit threshold for the duration of the programmable
timer. The MIC2587R provides a circuit breaker function
that automatically attempts to restart power after a load
current fault at a low duty cycle to prevent the MOSFET
from overheating. Each device provides either an active-
HIGH (1YM) or an active-LOW (2YM) “Power-is-Good”
signal to indicate that the output load voltage is within
tolerance of the application circuit’s design objective.
Datasheets and support documentation are available on
Micrel’s web site at: www.micrel.com.
Features
MIC2587: Pin-for-pin functional equivalent to the
LT1641
Operates from +10V to +80V with 100V ABS MAX
operation
Programmable current limit with analog foldback
Active current regulation minimizes inrush current
Electronic circuit breaker for overcurrent fault protection:
Output latch off (MIC2587)
Output auto-retry (MIC2587R)
Fast responding circuit breaker (< 1
loads
o ssh)otrt circuit
Programmable input undervoltage lockout
Open-drain “Power-is-Good” output for enabling DC/DC
converter(s):
Active-HIGH: MIC2587-1/MIC2587R-1
Active-LOW: MIC2587-2/MIC2587R-2
Fault Reporting
Applications
General-purpose hot board insertion
High-voltage, high-side electronic circuit breaker
+12V/+24V/+48V distributed power systems
+24V/+48V industrial/alarm systems
Telecom systems
Medical systems
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
January 24, 2013
Revision 2.0




Micrel Semiconductor

MIC2587 Datasheet Preview

MIC2587 Datasheet

Positive High-Voltage Hot Swap Controller

No Preview Available !

Micrel, Inc.
Typical Application
MIC2587/MIC2587R
January 24, 2013
2
Revision 2.0


Part Number MIC2587
Description Positive High-Voltage Hot Swap Controller
Maker Micrel Semiconductor
Total Page 22 Pages
PDF Download

MIC2587 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MIC2580A Hot-Swap PCI Power Controller
Micrel Semiconductor
2 MIC2582 Single Channel Hot Swap Controllers
Micrel Semiconductor
3 MIC2583 Single Channel Hot Swap Controllers
Micrel Semiconductor
4 MIC2584 (MIC2584 / MIC2585) Dual-Channel Hot Swap Controller/Sequencer
Micrel Semiconductor
5 MIC2585 (MIC2584 / MIC2585) Dual-Channel Hot Swap Controller/Sequencer
Micrel Semiconductor
6 MIC2586 Positive High-Voltage Hot Swap Controller /Sequencer
Micrel Semiconductor
7 MIC2586R Positive High-Voltage Hot Swap Controller /Sequencer
Micrel Semiconductor
8 MIC2587 Positive High-Voltage Hot Swap Controller
Micrel Semiconductor
9 MIC2587R Positive High-Voltage Hot Swap Controller
Micrel Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy