Datasheet4U Logo Datasheet4U.com

MIC22950 - 10A Integrated Switch Synchronous Buck Regulator

General Description

The Micrel MIC22950 is a high-efficiency 10A integrated switch, synchronous buck (step-down) regulator.

The MIC22950 switching frequency is programmable from 400kHz to 2MHz, allowing the customer to optimize designing either for efficiency or for the smallest footprint.

Key Features

  • a full range of sequencing and tracking options. The EN/DLY and the DELAY pins, combined with the POR/PG pin, allow multiple outputs to be sequenced in several ways during turn-on and turn-off by using EN pin. The RC (Ramp Control™) pin allows the device to be connected to any another device in the MIC22x00 family of products, to keep the output voltages within a certain delta V during start-up. The MIC22950 is available in a 32-pin 5mm x 5mm MLF® with a junction operating range from.
  • 40.

📥 Download Datasheet

Datasheet Details

Part number MIC22950
Manufacturer Micrel
File Size 1.08 MB
Description 10A Integrated Switch Synchronous Buck Regulator
Datasheet download datasheet MIC22950 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC2295 High Power Density 1.2A Boost Regulator Micrel Semiconductor
MIC2290 2mm 2mm PWM Boost Regulator with Internal Schotty Diode Micrel Semiconductor
MIC2291 1.2A PWM Boost Regulator Photo Flash LED Driver Micrel Semiconductor
MIC2292 High Frequency PWM White LED Drivers Micrel Semiconductor
MIC2293 High Frequency PWM White LED Drivers Micrel Semiconductor

Other Datasheets by Micrel

Part Number Description
MIC2292C High Frequency PWM White LED Drivers
MIC2293C High Frequency PWM White LED Drivers
MIC2251 High-Efficiency Low EMI Boost Regulator
MIC2253 3.5A 1MHz High Efficiency Boost Regulator
MIC2267 Input Current Limiting Synchronous Buck Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC22950 10A Integrated Switch Synchronous Buck Regulator with Frequency Programmable to 2MHz General Description The Micrel MIC22950 is a high-efficiency 10A integrated switch, synchronous buck (step-down) regulator. The MIC22950 switching frequency is programmable from 400kHz to 2MHz, allowing the customer to optimize designing either for efficiency or for the smallest footprint. The MIC22950 achieves over 95% efficiency while still switching at 2MHz over a broad load range. The ultra-high-speed control loop keeps the output voltage within regulation, even under extreme transient load swings commonly found in FPGAs and low voltage ASICs. The output voltage can be adjusted down to 0.7V in order to address all low-voltage power needs.