Datasheet4U Logo Datasheet4U.com

MDT2020B - EPROM-Based 8-bit micro-controller

General Description

This EPROM-Based 8-bit micro-controller uses a fully static CMOS design technology combines higher speed and smaller size with the low power and high noise immunity of CMOS.

On chip memory system includes 2.0 K bytes of ROM, and 80 bytes of static RAM.

2.

Key Features

  • The followings are some of the features on the hardware and software : ! Fully COMS static design ! 8-bit data bus ! On chip ROM size : 2 K words ! Internal RAM size : 80 bytes (72 general purpose, 8 special registers) ! 36 single word instructions ! 14-bit instructions ! 2-level stacks ! Operating voltage : 2.3 V ~ 6.3 V ! Operating frequency : 0 ~ 20 MHz ! The most fast execution time is 200 ns under 20 MHz in all single cycle instructions except the branch instruction. ! Addressing modes incl.

📥 Download Datasheet

Datasheet Details

Part number MDT2020B
Manufacturer Micon Design Technology
File Size 75.55 KB
Description EPROM-Based 8-bit micro-controller
Datasheet download datasheet MDT2020B Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MDT2020B MDT2020B Spec. Ver 2.2 1. General Description This EPROM-Based 8-bit micro-controller uses a fully static CMOS design technology combines higher speed and smaller size with the low power and high noise immunity of CMOS. On chip memory system includes 2.0 K bytes of ROM, and 80 bytes of static RAM. 2. Features The followings are some of the features on the hardware and software : ! Fully COMS static design ! 8-bit data bus ! On chip ROM size : 2 K words ! Internal RAM size : 80 bytes (72 general purpose, 8 special registers) ! 36 single word instructions ! 14-bit instructions ! 2-level stacks ! Operating voltage : 2.3 V ~ 6.3 V ! Operating frequency : 0 ~ 20 MHz ! The most fast execution time is 200 ns under 20 MHz in all single cycle instructions except the branch instruction.