Datasheet4U Logo Datasheet4U.com

MT6305B - GSM Power Management System

General Description

Use pin#3 (original NC pin) to program Provide alternative VCORE/VRTC.

VCORE/VRTC=1.8V/1.5V VCORE/VRTC voltas pin#3 is floating.

age.

Key Features

  • including current limiting, under voltage lock-out protection, deep discharge lockout protection and over temperature protection. MT6305BN/CY is offered in 48-pin QFN package. The tiny size and low profile reduce the required board area and increase the power density of the whole power system design. MT K MediaTek Confidential Co nfi de nti al Re lea se Revision 1.1.
  • Apr. 22, 2005 © 2002 MediaTek Inc. The infor.

📥 Download Datasheet

Datasheet Details

Part number MT6305B
Manufacturer MediaTek
File Size 694.56 KB
Description GSM Power Management System
Datasheet download datasheet MT6305B Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MT6318 Power Management ETC
MT6325 MR Switch Sensor MagnTek
MT6325SN MR Switch Sensor MagnTek
MT6339N3 60V 8A MOSFET MT Semiconductor
MT6339N5 60V 10A MOSFET MT Semiconductor

Other Datasheets by MediaTek

Part Number Description
MT6301 Touch-Screen Controller
MT6302 Dual SIM Card Controller
MT6318 PMIC Specification / power management
MT6322 PMIC
MT6323 PMIC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MediaTek MT6305B GSM Power Management System MT K Co nfi de nti al Re lea se Revision: 1.1 Confidential Information Release Date: Apr, 22, 2005 for SIM CO M Free Datasheet http://www.datasheet4u.com/ MT6305B Confidential Information Product Change Notice Original product name : MT6305N/FT New identification : MT6305BN/CY Change Contents Item 1 Change type New function Description Use pin#3 (original NC pin) to program Provide alternative VCORE/VRTC. VCORE/VRTC=1.8V/1.5V VCORE/VRTC voltas pin#3 is floating. age. VCORE/VRTC=1.2V/1.2V as pin#3 is GND. CHRIN can be up to 15V but the charger will be off automatically when CHRIN>Vac_limit. The spec. of Vac_limit is 8~9.5V. It can’ t be used with external linear charger. Change pin#29 (original NC pin) to VREF. Better power/ground plan.