Datasheet4U Logo Datasheet4U.com

SP809 - 3 Pin Microprocessor Supervisor Circuit

Description

The SP809 is a low power mic roproc essor (μP) supervisory circuit used to monitor power supplies in μP and digital systems.

It provides applications with benefits of circuit reliability and low cost by eliminating ext ernal components.

Features

  • Ultra Low Supply Current 1µA (typ).
  • Guaranteed Reset valid to VCC = 0.9V.
  • 140ms Power-On Reset Pulse Width.
  • Internally Fixed Threshold 2.3V, 2.6V, 2.9V, 3.1V, 4.4V, 4.6V.
  • 1.5% Voltage Threshold Tolerance.
  • 3 Pin SOT-23 Package Part Number SP809N SP809 Output Type Open Drain Active Low Push-Pull Low.

📥 Download Datasheet

Datasheet preview – SP809

Datasheet Details

Part number SP809
Manufacturer MaxLinear
File Size 735.42 KB
Description 3 Pin Microprocessor Supervisor Circuit
Datasheet download datasheet SP809 Datasheet
Additional preview pages of the SP809 datasheet.

📁 Similar Datasheet

  • SP809 - (SP809 / SP810) 3 Pin Microprocessor Supervisor Circuit (Sipex Corporation)
  • SP809 - 3 Pin Microprocessor Supervisor Circuit (Exar)
  • SP80001 - 800MHz Low-loss SAW Filter 53MHz Bandwidth (SIPAT)
  • SP8005 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
  • SP8006 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
  • SP8007 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
  • SP8008 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
  • SP8008-08UTG - TVS Diode Arrays (Littelfuse)
  • SP8009 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
  • SP8009E - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
Other Datasheets by Maxlinear
  • SP810 - 3 Pin Microprocessor Supervisor Circuit

Full PDF Text Transcription

Click to expand full text
July 14, 2021 GENERAL DESCRIPTION The SP809 is a low power mic roproc essor (μP) supervisory circuit used to monitor power supplies in μP and digital systems. It provides applications with benefits of circuit reliability and low cost by eliminating ext ernal components. If the VCC supply voltage falls below preset threshold then a reset signal is asserted for at least 140ms after VCC has risen above the reset threshold. The SP809 was designed with a reset comparator to help identify invalid signals, which last less than 140ms. Low supply current (1μA) makes SP809 ideal for port able equipment. The SP809 is available in a 3 pin SOT-23 pac kage. SP809 3 Pin Microprocessor Supervisor Circuit R e v. 2.0.
Published: |