Datasheet4U Logo Datasheet4U.com

MAX9122 - Quad LVDS Line Receivers

Download the MAX9122 datasheet PDF. This datasheet also covers the MAX9121 variant, as both devices belong to the same quad lvds line receivers family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX9121/MAX9122 quad low-voltage differential signaling (LVDS) differential line receivers are ideal for applications requiring high data rates, low power, and low noise.

Key Features

  • integrated parallel termination resistors (nominally 107Ω), which eliminate the requirement for four discrete termination resistors and reduce stub lengths. The MAX9121 inputs are high impedance and require an external termination resistor when used in a point-to-point connection. The devices support a wide common-mode input range of 0.05V to 2.35V, allowing for ground potential differences and common-mode noise between the driver and the receiver. A fail-safe feature sets the output high when t.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX9121_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX912 Low-Power Precision TTL Comparators Maxim
MAX9120 Beyond-the-Rails Comparators With/Without Reference Maxim Integrated
MAX9124 Quad LVDS Line Driver Maxim
MAX9125 Quad LVDS Line Receivers Maxim
MAX9126 Quad LVDS Line Receivers Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX9121 Quad LVDS Line Receivers
MAX9123 Quad LVDS Line Driver
MAX9129 Quad Bus LVDS Driver
MAX910 (MAX910 / MAX911) High SPeed Threshold Programmable Voltage Comparators
MAX911 (MAX910 / MAX911) High SPeed Threshold Programmable Voltage Comparators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1909; Rev 0; 6/01 Quad LVDS Line Receivers with Integrated Termination and Flow-Through Pinout General Description The MAX9121/MAX9122 quad low-voltage differential signaling (LVDS) differential line receivers are ideal for applications requiring high data rates, low power, and low noise. The MAX9121/MAX9122 are guaranteed to receive data at speeds up to 500Mbps (250MHz) over controlledimpedance media of approximately 100Ω. The transmission media may be printed circuit (PC) board traces or www.DataSheet4U.com cables. The MAX9121/MAX9122 accept four LVDS differential inputs and translate them to LVCMOS outputs. The MAX9122 features integrated parallel termination resistors (nominally 107Ω), which eliminate the requirement for four discrete termination resistors and reduce stub lengths.