Datasheet4U Logo Datasheet4U.com

MAX8738 - EEPROM-Programmable TFT VCOM Calibrator

Key Features

  • 7-Bit Adjustable Sink-Current Output.
  • Resistor-Adjustable, Full-Scale Range.
  • Guaranteed Monotonic Output Over Operating Range.
  • 2-Wire I2C Interface.
  • EEPROM Stores VCOM Setting.
  • 4.5V to 20V Analog Supply Voltage Range (VAVDD).
  • 60µA (max) AVDD Supply Current.
  • 16.1V to 28V EEPROM Programming Supply Voltage Range (VHV).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX873 Low-Power / Low-Drift / +2.5V/+5V/+10V Precision Voltage References Maxim
MAX870 Switched-Capacitor Voltage Inverters Maxim
MAX871 Switched-Capacitor Voltage Inverters Maxim
MAX872 Precision Voltage References Maxim
MAX8720 Dynamically Adjustable 6-Bit VID Step-Down Controller Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX8730 Low-Cost Battery Charger
MAX8731 SMBus Level 2 Battery Charger
MAX8731A SMBus Level 2 Battery Charger
MAX8732 Main Power-Supply Controllers
MAX8732A Main Power-Supply Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3624; Rev 0; 3/05 KIT ATION EVALU LE B A IL A AV EEPROM-Programmable TFT VCOM Calibrator with I2C Interface General Description Features ♦ 7-Bit Adjustable Sink-Current Output ♦ Resistor-Adjustable, Full-Scale Range ♦ Guaranteed Monotonic Output Over Operating Range ♦ 2-Wire I2C Interface ♦ EEPROM Stores VCOM Setting ♦ 4.5V to 20V Analog Supply Voltage Range (VAVDD) ♦ 60µA (max) AVDD Supply Current ♦ 16.1V to 28V EEPROM Programming Supply Voltage Range (VHV) ♦ <1µA HV Supply Current (Not in Program Mode) ♦ 8-Pin µMAX MAX8738 The MAX8738 is an I2C-programmable VCOM-adjustment solution for thin-film transistor (TFT) liquid-crystal displays (LCDs).