Datasheet4U Logo Datasheet4U.com

MAX7381 - 3-Pin Silicon Oscillator

Description

The MAX7381 is a silicon oscillator intended as a low-cost improvement to ceramic resonators, crystals, and crystal oscillator modules as the clock source for microcontrollers and UARTs in 3V, 3.3V, and 5V applications.

Features

  • MAX7381.

📥 Download Datasheet

📁 Similar Datasheet

  • MAX7382 - Silicon Oscillator with Reset Output (Maxim)
  • MAX7383 - Silicon Oscillator with Low-Power Frequency Switching (Maxim)
  • MAX7389 - Microcontroller Clock Generator (Maxim Integrated)
  • MAX738A - Current-Mode PWM DC-DC Converters (Maxim Integrated)
  • MAX730 - 5V / Step-Down / Current-Mode PWM DC-DC Converters (Maxim)
  • MAX7300 - 20-Port or 28-Port I/O Expander (Maxim)
  • MAX7301 - 20-Port and 28-Port I/O Expander (Maxim)
  • MAX730A - Current-Mode PWM DC-DC Converters (Maxim Integrated)
  • MAX731 - +5V/Adjustable Step-Up Current-Mode DC-DC Converters (Maxim)
  • MAX7312 - 2-Wire-Interfaced 16-Bit I/O Port Expander (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX738 - (MAX730 / MAX738 / MAX750 / MAX758) Step Down Current Mode PWM Regulators
  • MAX7384 - Silicon Oscillator
  • MAX7387 - System Monitoring Oscillator
  • MAX7388 - System Monitoring Oscillator
  • MAX7310 - 2-Wire-Interfaced 8-Bit I/O Port Expander
  • MAX7311 - 2-Wire-Interfaced 16-Bit I/O Port Expander
  • MAX7313 - 16-Port I/O Expander
  • MAX7314 - 18-Port GPIO

Full PDF Text Transcription

Click to expand full text
19-3697; Rev 0; 4/05 3-Pin Silicon Oscillator General Description The MAX7381 is a silicon oscillator intended as a low-cost improvement to ceramic resonators, crystals, and crystal oscillator modules as the clock source for microcontrollers and UARTs in 3V, 3.3V, and 5V applications. The MAX7381 is an integrated oscillator, supplied at specific frequencies, just like crystals and resonators, and with a rail-to-rail, 50%, duty-cycle square-wave output. The oscillator frequency is generated directly without the use of a phase-locked loop (PLL). No additional components are required for setting or adjusting the frequency. www.DataSheet4U.com Unlike typical crystal and ceramic resonator oscillator circuits, the MAX7381 is resistant to vibration and EMI.
Published: |