Datasheet4U Logo Datasheet4U.com

MAX5972A - IEEE 802.3af/at-Compliant Powered Device Interface Controller

Description

The MAX5972A provides a complete interface for a powered device (PD) to comply with the IEEE® 802.3af/ at standard in a power-over-Ethernet (PoE) system.

Features

  • an input UVLO with wide hysteresis and long deglitch time to compensate for twisted-pair cable resistive drop and to assure glitch-free transition during power-on/-off conditions. The MAX5972A can withstand up to 100V at the input. The MAX5972A supports a 2-event classification method as specified in the IEEE 802.3at standard and provides a signal to indicate when probed by Type 2 power-sourcing equipment (PSE). The device detects the presence of a wall adapter power-source connection and allows.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5976A Hot-Swap Solution Maxim Integrated
MAX5976B Hot-Swap Solution Maxim Integrated
MAX5900 -100V SOT23 Simple Swapper Hot-Swap Controllers Maxim
MAX5901 -100V SOT23 Simple Swapper Hot-Swap Controllers Maxim Integrated
MAX5902 +72V SOT23 Simple Swapper Hot-Swap Controllers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX5971A Single-Port 40W IEEE 802.3af/at PSE Controller with Integrated MOSFET
MAX5971B PSE Controller
MAX5973 Phase Redundancy Power Supervisor
MAX5974A Current-Mode PWM Controllers
MAX5974B Current-Mode PWM Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4924; Rev 1; 2/10 TION KIT EVALUA BLE A IL A V A www.DataSheet4U.com IEEE 802.3af/at-Compliant, Powered Device Interface Controller with Integrated Power MOSFET General Description The MAX5972A provides a complete interface for a powered device (PD) to comply with the IEEE® 802.3af/ at standard in a power-over-Ethernet (PoE) system. The MAX5972A provides the PD with a detection signature, classification signature, and an integrated isolation power switch with inrush current control. During the inrush period, the MAX5972A limits the current to less than 180mA before switching to the higher current limit (720mA to 880mA) when the isolation power MOSFET is fully enhanced.
Published: |