Datasheet4U Logo Datasheet4U.com

MAX5969A - Powered Device Interface Controllers

Description

The MAX5969A/MAX5969B provide a complete interface for a powered device (PD) to comply with the IEEE® 802.3af/at standard in a power-over-Ethernet (PoE) system.

Features

  • S IEEE 802.3af/at Compliant S 2-Event Classification S Simplified Wall Adapter Interface S PoE Classification 0 to 5 S 100V Input Absolute Maximum Rating S Inrush Current Limit of 180mA Maximum S Current Limit During Normal Operation Between 720mA and 880mA S Current Limit and Foldback S Legacy UVLO at 36V (MAX5969A) S IEEE 802.3af/at-Compliant, 40V UVLO (MAX5969B) S Overtemperature Protection S Thermally Enhanced, 3mm x 3mm, 10-Pin TDFN MAX5969A/MAX5969B Ordering Information PART.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5969D Powered Device Interface Controller Maxim Integrated
MAX5900 -100V SOT23 Simple Swapper Hot-Swap Controllers Maxim
MAX5901 -100V SOT23 Simple Swapper Hot-Swap Controllers Maxim Integrated
MAX5902 +72V SOT23 Simple Swapper Hot-Swap Controllers Maxim
MAX5903 +72V SOT23 Simple Swapper Hot-Swap Controllers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX5969B Powered Device Interface Controllers
MAX5960 (MAX5959 / MAX5960) Hot-Plug Controllers
MAX5961 Hot-Swap Controller
MAX5963 Hot-Swap and Diode ORing Controller
MAX5965A PSE Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5008; Rev 0; 12/09 TION KIT EVALUA BLE AVAILA IEEE 802.3af/at-Compliant, Powered Device Interface Controllers with Integrated Power MOSFET General Description The MAX5969A/MAX5969B provide a complete interface for a powered device (PD) to comply with the IEEE® 802.3af/at standard in a power-over-Ethernet (PoE) system. The MAX5969A/MAX5969B provide the PD with a detection signature, classification signature, and an integrated isolation power switch with inrush current control. During the inrush period, the MAX5969A/MAX5969B limit the current to less than 180mA before switching to the higher current limit (720mA to 880mA) when the isolation power MOSFET is fully enhanced.
Published: |