Datasheet4U Logo Datasheet4U.com

MAX4397 - Audio/Video Switch For Dual SCART Connectors

Description

The MAX4397 dual SCART switch matrix routes audio and video signals between an MPEG encoder and two external SCART connectors under I 2C

control, and meets the requirements of EN50049-1, IEC 933-1, Canal+, and BskyB standards.

Video Outputs Drive 2VP-P into 150Ω Audio Output

Features

  • MAX4397 The video and audio channels feature input source.
  • AC-Coupled Video Inputs with Internal Clamp and selection multiplexers, input buffers, and output buffers Bias for routing all inputs to selected outputs. The MAX4397D audio encoder input is differential DC-coupled, while the.
  • DC-Coupled Video Outputs MAX4397S audio encoder input is single-ended AC.
  • Composite Video Signal Created Internally from coupled. Except for the MAX4397D’s audio encoder Y/C Inputs input.

📥 Download Datasheet

Datasheet preview – MAX4397

📁 Similar Datasheet

  • MAX439 - Micropower Op Amps (Maxim)
  • MAX4390 - 85MHz Op Amps (Maxim Integrated)
  • MAX4391 - CMOS Micropower Inverting Switching Regulator (Maxim)
  • MAX4392 - 85MHz Op Amps (Maxim Integrated)
  • MAX4393 - 85MHz Op Amps (Maxim Integrated)
  • MAX4394 - 85MHz Op Amps (Maxim Integrated)
  • MAX4395 - 85MHz Op Amps (Maxim Integrated)
  • MAX4396 - 85MHz Op Amps (Maxim Integrated)
  • MAX4399 - Audio/Video Switch for Three SCART Connectors (Maxim)
  • MAX430 - 15V Chopper-Stabilized Operational Amplifier (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX4355 - 16x16 Nonblocking Video Crosspoint Switch
  • MAX4357 - 32 X 16 Nonblocking Video Crosspoint Switch
  • MAX4372F - High-Side Current-Sense Amplifier
  • MAX4372H - High-Side Current-Sense Amplifier
  • MAX4004 - High-Side Current Monitors
  • MAX4006 - High-Side Current Monitors
  • MAX4007 - High-Side Current Monitors
  • MAX4008 - High-Side Current Monitors

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 19-3618; Rev 0; 4/05 KIT ATION EVALU E L B A AVAIL Audio/Video Switch for Dual SCART Connectors General Description The MAX4397 dual SCART switch matrix routes audio and video signals between an MPEG encoder and two external SCART connectors under I 2C* control, and meets the requirements of EN50049-1, IEC 933-1, Canal+, and BskyB standards. ♦ Video Outputs Drive 2VP-P into 150Ω ♦ Audio Outputs Drive 3VRMS into 10kΩ ♦ Clickless, Popless Audio Gain Control and Switching Features MAX4397 The video and audio channels feature input source ♦ AC-Coupled Video Inputs with Internal Clamp and selection multiplexers, input buffers, and output buffers Bias for routing all inputs to selected outputs.
Published: |