Datasheet4U Logo Datasheet4U.com

MAX4007 - High-Side Current Monitors

General Description

The MAX4007/MAX4008 precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications.

They offer a connection point for the reference current and a monitor output that produces a signal proportional to the reference current.

Key Features

  • o Wide Reference Current Dynamic Range Guaranteed 250nA to 2.5mA with 5% Monitor Accuracy Extended 10nA to 10mA with 10% Monitor Accuracy o Current (MAX4007) or Voltage (MAX4008) Monitor Outputs o Reference Current-Limit Protection (20mA, typ) o Voltage Clamp Protects Subsequent Output Circuitry o +2.7V to +76V Wide Voltage Range Operation o 6-Pin SOT23 Packages MAX4007/MAX4008 Ordering Information PART TEMP RANGE PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX40070 Low-Power Comparator Analog Devices
MAX40072 Low-Power Comparator Analog Devices
MAX400 Ultra Low Offset Voltage Operational Amplifier Maxim
MAX4000 2.5GHz 45dB RF-Detecting Controllers Maxim
MAX40000 1.7V nanoPower Comparators Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX4004 High-Side Current Monitors
MAX4006 High-Side Current Monitors
MAX4008 High-Side Current Monitors
MAX4079 Complete Audio/Video Backend Solution
MAX4208 Precision Instrumentation Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-2743; Rev 1; 5/03 High-Accuracy, 76V, High-Side Current Monitors in SOT23 General Description The MAX4007/MAX4008 precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications. They offer a connection point for the reference current and a monitor output that produces a signal proportional to the reference current. The monitor output of the MAX4007 is a current proportional to the reference current. The monitor output of the MAX4008 is a voltage proportional to the reference current. The current monitors have six decades of dynamic range and monitor reference currents of 250nA to 2.5mA with better than 5% accuracy. The photodiode current can be monitored from 10nA to 10mA with reduced accuracy.