Datasheet4U Logo Datasheet4U.com

MAX3942 - 10Gbps Modulator Driver

Description

The MAX3942 is designed to drive high-speed optical modulators at data rates up to 10.7Gbps.

It functions as a modulation circuit, with an integrated control op amp externally programmed by a DC voltage.

Features

  • MAX3942.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX394 Low-Voltage / Quad / SPDT / CMOS Analog Switch Maxim
MAX394 CMOS Analog Switch Analog Devices
MAX3941 10Gbps EAM Driver with Integrated Bias Network Maxim
MAX3949 AC-Coupled Laser Driver Maxim Integrated
MAX3901 150Mbps Automotive Fiber Optic Receivers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX3940 10Gbps EAM Driver
MAX3945 SFP+ Dual-Path Limiting Amplifier
MAX3946 SFP+ Laser Driver
MAX3964 (MAX3964 - MAX3968) 125Mbps to 266Mbps Limiting Amplifiers
MAX3964A 125Mbps to 266Mbps Limiting Amplifiers

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 19-2934; Rev 1; 6/07 10Gbps Modulator Driver General Description The MAX3942 is designed to drive high-speed optical modulators at data rates up to 10.7Gbps. It functions as a modulation circuit, with an integrated control op amp externally programmed by a DC voltage. A high-bandwidth, fully differential signal path is internally implemented to minimize jitter accumulation. When a clock signal is available, the integrated data-retiming function can be selected to reject input-signal jitter. The MAX3942 receives differential CML signals (groundreferenced) with on-chip line terminations of 50Ω. Each of the differential outputs has an on-chip 50Ω resistor for back termination.
Published: |